FordParts
My Garage
My Account
Cart
OEM 2009 Ford Crown Victoria Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Brake Lines found
2009 Ford Crown Victoria Flex Hose, Rear Passenger Side Part Number: 6W1Z-2A442-AA
$27.56 MSRP: $38.12You Save: $10.56 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Base No.: 2A442
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.4 x 6.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2A442-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Brake Tube Part Number: 9W7Z-2C296-A
Product Specifications- Other Name: Tube Assembly - Brake; Brake Line
- Base No.: 2C296
- Item Weight: 1.70 Pounds
- Item Dimensions: 30.9 x 20.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9W7Z-2C296-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Base No.: 2A442
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.5 x 3.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2A442-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.8 x 4.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2078-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.3 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2078-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Brake Line
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Crown Victoria Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Crown Victoria Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Crown Victoria Brake Line Parts Q&A
- Q: How to Service and Repair the Brake Line Hose on 2009 Ford Crown Victoria?A: The brake flexible hose service and repair process begins with using clean specified brake fluid which excludes previously drained fluid to protect against contamination and damage. Beware against letting brake fluid come into contact with either painted surfaces or plastic materials since it might trigger harm; quickly wash any affected areas with water when such contact occurs. A person must disable the fire suppression system before performing services on the vehicle for safety reasons. Install new washers before tightening the brake caliper flow bolt to 48 Nm (35 lb-ft) torque using the discarding two copper washers. You need to disconnect the brake tube fitting at the brake flexible hose while tightening the fitting to 17 Nm (150 lb-in) before reinstalling it. Install the brake flexible hose and reset the bracket bolt with tightness at 20 Nm (177 lb-in). You should reverse the removal method to put on the new hose and perform brake caliper bleeding work. The vehicle requires a fire suppression system restart after the service completion.