FordParts
My Garage
My Account
Cart
OEM 2009 Ford Crown Victoria Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Parking Brake Cables found
2009 Ford Crown Victoria Front Cable Part Number: 3W1Z-2853-AA
$39.96 MSRP: $63.45You Save: $23.49 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable, Front; Brake Cable
- Position: Front
- Base No.: 2853
- Item Weight: 1.70 Pounds
- Item Dimensions: 0.1 x 14.1 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-2853-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Rear Cable, Driver Side Part Number: 5W7Z-2A635-B
$54.79 MSRP: $75.80You Save: $21.01 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: LH, Police with FSS (Fire Suppression System)
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.7 x 3.9 x 28.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W7Z-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Rear Cable, Passenger Side Part Number: 6W1Z-2A635-AA
$53.59 MSRP: $74.13You Save: $20.54 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: RH, Less natural gas vehicle
- Position: Passenger Side
- Replaces: 3W1Z-2A635-AA
- Base No.: 2A635
- Item Weight: 2.40 Pounds
- Item Dimensions: 4.6 x 17.8 x 17.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: LH, Less Natural Gas Vehicle-Less long wheelbase
- Position: Driver Side
- Replaces: 3W7Z-2A635-CA
- Base No.: 2A635
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.7 x 3.9 x 28.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W7Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Crown Victoria Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Crown Victoria Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Crown Victoria Parking Brake Cable Parts Q&A
- Q: How to service the front parking brake cable on 2009 Ford Crown Victoria?A: Every service process for front parking brake cables begins with loosening the parking brake control through use of the parking brake release handle. The service process must start with depowering the fire suppression system to avoid potentially severe personal injury. The vehicle should be placed in neutral position on a hoist before pulling down the parking brake adjuster clip to activate the full brake control. The parking brake adjuster reaches its locking state after pressing the adjuster clip upward. Finally let go of the parking brake control. The front parking brake cable must be detached from the LH rear parking brake cable at their cable union followed by removal of the front parking brake conduit from the frame bracket through its retaining tabs. Proceed by disconnecting the front parking brake cable conduit from the parking brake control bracket after a precise method then unfasten the front parking brake cable bracket bolt and tighten to 12 Nm (106 lb-in) when installing. The parking brake control requires cable disconnection followed by feeding the front parking brake conduit grommet through the body to extract the cable. The installation procedure requires using the reverse order of removal and cable tension adjustment for the parking brake mechanism. The vehicle requires a system repower after services since omitting this procedure could result in dangerous personal injury.