FordParts
My Garage
My Account
Cart
OEM 2009 Ford Crown Victoria Engine Mount
Engine Motor Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Engine Mounts found
2009 Ford Crown Victoria Transmission Mount, Rear Part Number: 3W1Z-6068-BA
$42.27 MSRP: $61.53You Save: $19.26 (32%)Product Specifications- Other Name: Insulator Assembly - Engine Support; Auto Trans Mount, Rear; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Manufacturer Note: Insulator & retainer, rear engine support
- Position: Rear
- Base No.: 6068
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.8 x 3.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Front Mount, Passenger Side Part Number: 3W1Z-6038-BB
$76.00 MSRP: $94.00You Save: $18.00 (20%)Product Specifications- Other Name: Insulator Assembly; Engine Mount, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: RH, front, police, taxi, fleet, limo - severe duty
- Position: Front Passenger Side
- Base No.: 6038
- Item Weight: 5.80 Pounds
- Item Dimensions: 8.8 x 6.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Front Mount, Driver Side Part Number: 3W1Z-6038-BA
$67.78 MSRP: $98.67You Save: $30.89 (32%)Product Specifications- Other Name: Insulator Assembly - Engine Support; Engine Mount, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: LH, FRONT
- Position: Driver Side
- Base No.: 6038
- Item Weight: 6.10 Pounds
- Item Dimensions: 10.0 x 9.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Front Mount, Passenger Side Part Number: 3W7Z-6038-AA
$63.01 MSRP: $96.83You Save: $33.82 (35%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: RH, front, same as 3W1Z-6038-BB but without the heat shield, for lighter duty., not for police, taxi, limo or fleet.
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.4 x 8.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Crown Victoria Engine Mount
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Crown Victoria Engine Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Crown Victoria Engine Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Crown Victoria Engine Mount Parts Q&A
- Q: How to remove and replace the left-hand engine mount on 2009 Ford Crown Victoria?A: Proceeding with left-hand engine mount service you should perform ventilation procedures on the fire suppression system to reduce risks of serious injury. Place the vehicle at neutral gear before setting it on the hoist. The work starts by taking out the generator followed by attaching the Engine Lifting Bracket and the Engine Support Bar. Proceed by removing the oil filter then discard it while performing oil lubrication on the O-ring seal of the new filter with fresh engine oil before installation. Secure both left-hand and right-hand lower engine mount nuts with 90 Nm (66 lb-ft) torque before reinstalling them. Raising the engine using the Engine Support Bar allows you to remove the three bolts on the left-hand engine mount before torquing these bolts to 70 Nm (52 lb-ft) upon reinstallation. Repower the vehicle with its fire suppression system by following the safety and operating procedures exactly as directed to ensure proper functionality.