What precautions should be taken when servicing a shock absorber on 2009 Ford Crown Victoria?

Services on shock absorbers must maintain body parts out of the way from shock absorbers or strut rods since these components can extend automatically which leads to severe injury potential. The shock absorber and strut tube contains gas pressure requiring that heat or flame applications must be avoided because an explosion could occur. The performance quality of essential systems depends on Suspension fasteners so technicians must replace existing fasteners with new ones having identical part numbers or related alternatives while following specified torque values for proper system retention. Shock absorbers operate as single units therefore they can be replaced one at a time without needing a pair swap. A vehicle equipped with fire suppression needs system depowering before any service work to avoid injuries to personnel. Start your procedure by taking off the wheel and tire and follow it with support of the rear axle by a proper jack or jackstands. Detach the upper shock nut, washer and insulator before discarding them while installing a new nut which should be tightened to 40 Nm (30 lb-ft). You should take the lower shock nut, bolt and shock absorber out. Throw away the nut and bolt then add a new nut and tighten it to 90 Nm. Equipped vehicles which have fire suppression systems need system repowering following installation through proper safety procedure execution.

OEM 2009 Ford Crown Victoria Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Shock Absorbers found

View related parts
2009 Ford Crown Victoria Shock Absorber
Part Number: BW7Z-18124-A
$102.65 MSRP: $168.91
You Save: $66.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Air Spring to Coil Spring Conversion; Complete Strut.; Strut; Shock
- Replaces: 7W7Z-18124-H, ASH-1035, 6W7Z-18124-B, 6W7Z-18124-D, ASH-24529, 7W7Z-18124-A, BW7Z-18124-B, 6W7Z-18124-A, 7W7Z-18124-C, 7W7Z-18124-D, ASH-1037, ASH-1036, ASH-12274
- Base No.: 18124
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.9 x 5.0 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BW7Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Crown Victoria Shock Absorber, Gray/Red, Rear
Part Number: 8W7Z-18125-D
$77.11 MSRP: $129.45
You Save: $52.34 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 4W3Z-18125-AA, 6W7Z-18125-D, 6W1Z-18125-A, 7W7Z-18125-D, 8W3Z-18125-A, 8W7Z-18125-B, ASH-1152, ASH-24537, ASH-711, 7W1Z-18125-A, ASH-12275, 3W7Z-18125-GA, 4W7Z-18125-DA, 3U2Z-18125-AC, 7W3Z-18125-H, 8W7Z-18125-C, ASH-24538, ASH-1038, ASH-24536, ASH-267, ASH-1041
- Base No.: 18125
- Item Weight: 5.10 Pounds
- Item Dimensions: 27.0 x 3.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W7Z-18125-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Crown Victoria Shock Absorber, Blue/Green, Rear
Part Number: BW7Z-18125-B
$85.31 MSRP: $140.36
You Save: $55.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Shock; Strut & Shock Kit; Air to Coil Conversion; Complete Strut; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 3U2Z-18125-AF, 3W7Z-18125-FA, 4W7Z-18125-CA, 6W7Z-18125-C, 6W7Z-18125-B, 7W7Z-18125-B, 7W7Z-18125-C, 8W1Z-18125-D, 8W1Z-18125-B, 8W1Z-18125-C, ASH-1040, ASH-1039, ASH-24535, ASH-1151, ASH-24490, 7W1Z-18125-G, ASH-710, 3U2Z-18125-AB, ASH-12276, BW7Z-18125-A, 8W1Z-18125-A, ASH-24534, ASH-24491
- Base No.: 18125
- Item Weight: 10.60 Pounds
- Item Dimensions: 29.4 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BW7Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Crown Victoria Shock Absorber
Part Number: 9W1Z-18124-A
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Air Spring to Coil Spring Conversion; Complete Strut.; Strut; Shock
- Replaces: 6W1Z-18124-A, ASH-1034, 7W1Z-18124-A
- Base No.: 18124
- Item Weight: 6.50 Pounds
- Item Dimensions: 22.3 x 5.0 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9W1Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Ford Crown Victoria Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Crown Victoria Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Crown Victoria Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Crown Victoria Shock Absorber Parts Questions & Experts Answers

Q: What precautions should be taken when servicing a shock absorber on 2009 Ford Crown Victoria?
A: Services on shock absorbers must maintain body parts out of the way from shock absorbers or strut rods since these components can extend automatically which leads to severe injury potential. The shock absorber and strut tube contains gas pressure requiring that heat or flame applications must be avoided because an explosion could occur. The performance quality of essential systems depends on Suspension fasteners so technicians must replace existing fasteners with new ones having identical part numbers or related alternatives while following specified torque values for proper system retention. Shock absorbers operate as single units therefore they can be replaced one at a time without needing a pair swap. A vehicle equipped with fire suppression needs system depowering before any service work to avoid injuries to personnel. Start your procedure by taking off the wheel and tire and follow it with support of the rear axle by a proper jack or jackstands. Detach the upper shock nut, washer and insulator before discarding them while installing a new nut which should be tightened to 40 Nm (30 lb-ft). You should take the lower shock nut, bolt and shock absorber out. Throw away the nut and bolt then add a new nut and tighten it to 90 Nm. Equipped vehicles which have fire suppression systems need system repowering following installation through proper safety procedure execution.