How to Locate, Remove, and Install the Fuel Pump Driver Module on 2009 Ford E-150?

The Fuel Pump Driver Module is located in the left frame rail and is located behind the spare tire. To do so, unscrew the electrical connector of the module and remove the 2 securing bolts. In a new module installation, make sure that bolts are tightened to 10 Nm (89 lb-in) and reverse the process used to install the bolts to remove them correctly.

OEM 2009 Ford E-150 Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

View related parts
2009 Ford E-150 Fuel Pump Relay Part Number: AA8Z-9D370-B
$68.24 MSRP: $132.44
You Save: $64.20 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Module - Engine Fuel; Fuel Pump Driver Module
- Replaced by: GA8Z-9D370-A
- Base No.: 9D370
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.4 x 5.5 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AA8Z-9D370-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG

2009 Ford E-150 Fuel Pump Driver Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-150 Fuel Pump Driver Module available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-150 Fuel Pump Driver Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-150 Fuel Pump Driver Module Parts Q&A

Q: How to Locate, Remove, and Install the Fuel Pump Driver Module on 2009 Ford E-150?
A: The Fuel Pump Driver Module is located in the left frame rail and is located behind the spare tire. To do so, unscrew the electrical connector of the module and remove the 2 securing bolts. In a new module installation, make sure that bolts are tightened to 10 Nm (89 lb-in) and reverse the process used to install the bolts to remove them correctly.