How to service the fuel pump driver module (FPDM) on 2008 Ford E-150?

As a tool to replace the fuel pump driver module (FPDM), a hoist must place the vehicle in neutral position. To remove the FPDM, disconnect the electrical connector and take out the two retaining nuts. Attach the new module, screw the nuts into 10 Nm (89 lb-in) and undo the steps of removal.

OEM 2008 Ford E-150 Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

View related parts
2008 Ford E-150 Control Module Part Number: 6C2Z-9D372-A
$117.94 MSRP: $171.67
You Save: $53.73 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Fuel; Fuel Pump Driver Module; Fuel Pump Controller; Module
- Replaces: 6L1Z-9D372-AD, 4C2Z-9D372-BA, 6L1Z-9D372-AA
- Base No.: 9D372
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.3 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-9D372-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2008 Ford E-150 Fuel Pump Driver Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-150 Fuel Pump Driver Module available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-150 Fuel Pump Driver Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-150 Fuel Pump Driver Module Parts Q&A

Q: How to service the fuel pump driver module (FPDM) on 2008 Ford E-150?
A: As a tool to replace the fuel pump driver module (FPDM), a hoist must place the vehicle in neutral position. To remove the FPDM, disconnect the electrical connector and take out the two retaining nuts. Attach the new module, screw the nuts into 10 Nm (89 lb-in) and undo the steps of removal.