How to Service and Repair the Motor and Transmission Mount for the 4R70E/4R75E on 2009 Ford E-150?

The procedure to repair or service the transmission mount starts by properly elevating the vehicle with jack support under it. A high-lift transmission jack should be placed underneath the transmission to lift it while you remove the two transmission insulator nuts until the retainer studs separate from the transmission support crossmember. The second step requires users to remove all transmission insulator bolts along with the insulator and retainer piece. The installation begins with inserting the transmission insulator along with its retainer before attaching the bolts at 90 Nm (66 lb-ft). Lower the transmission until the retainer studs match up with the crossmember holes, then the complete weight of the transmission should rest on the crossmember. The installation of transmission insulator and retainer onto crossmember nuts should be done using torque to 90 Nm (66 lb-ft). After removing the supports the vehicle can be slowly lowered until the transmission rests on its support points.

OEM 2009 Ford E-150 Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Motor And Transmission Mounts found

View related parts
2009 Ford E-150 Transmission Mount, Passenger Side
Part Number: F81Z-6068-DA
$33.37 MSRP: $47.33
You Save: $13.96 (30%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount
- Position: Passenger Side
- Replaces: F7UZ-6068-EA
- Base No.: 6068
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6068-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Side Mount, Driver Side
Part Number: F7UZ-6038-DB
$108.09 MSRP: $157.33
You Save: $49.24 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Motor Mount; Front Mount
- Position: Driver Side
- Replaces: 3C2Z-6038-AA
- Base No.: 6038
- Item Weight: 8.40 Pounds
- Item Dimensions: 10.3 x 8.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7UZ-6038-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Side Mount, Passenger Side
Part Number: F7UZ-6038-DC
$44.39 MSRP: $63.50
You Save: $19.11 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Front Mount
- Position: Passenger Side
- Replaces: F7UZ-6038-DA
- Base No.: 6038
- Item Weight: 9.90 Pounds
- Item Dimensions: 9.9 x 9.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7UZ-6038-DC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Mount Bracket, Passenger Side
Part Number: 8C2Z-6028-A
$44.34 MSRP: $63.43
You Save: $19.09 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount Bracket, Right; Motor Mount; Lower Mount; Bracket; Engine Mount Bracket
- Position: Passenger Side
- Replaces: F7UZ-6028-AB
- Base No.: 6028
- Item Weight: 6.00 Pounds
- Item Dimensions: 5.6 x 4.5 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-6028-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Mount Bracket
Part Number: AC2Z-6A023-A
$56.91 MSRP: $82.83
You Save: $25.92 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket; Transmission Crossmember; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Motor Mount; Transmission Support; Crossmember
- Replaces: 9C2Z-6A023-A
- Base No.: 6A023
- Item Weight: 22.70 Pounds
- Item Dimensions: 6.3 x 47.7 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC2Z-6A023-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Mount Bracket, Driver Side
Part Number: 8C2Z-6029-A
$45.34 MSRP: $66.00
You Save: $20.66 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Left; Motor Mount; Lower Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: F7UZ-6029-AA
- Base No.: 6029
- Item Weight: 6.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-6029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Mount Bracket
Part Number: 9C2Z-6A023-C
$46.63 MSRP: $66.72
You Save: $20.09 (31%)
Product Specifications
- Other Name: Bracket; Transmission Crossmember; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Motor Mount; Transmission Support
- Replaces: 9C2Z-6A023-B
- Base No.: 6A023
- Item Weight: 21.60 Pounds
- Item Dimensions: 49.9 x 10.1 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-6A023-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG

2009 Ford E-150 Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-150 Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-150 Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-150 Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount for the 4R70E/4R75E on 2009 Ford E-150?
A: The procedure to repair or service the transmission mount starts by properly elevating the vehicle with jack support under it. A high-lift transmission jack should be placed underneath the transmission to lift it while you remove the two transmission insulator nuts until the retainer studs separate from the transmission support crossmember. The second step requires users to remove all transmission insulator bolts along with the insulator and retainer piece. The installation begins with inserting the transmission insulator along with its retainer before attaching the bolts at 90 Nm (66 lb-ft). Lower the transmission until the retainer studs match up with the crossmember holes, then the complete weight of the transmission should rest on the crossmember. The installation of transmission insulator and retainer onto crossmember nuts should be done using torque to 90 Nm (66 lb-ft). After removing the supports the vehicle can be slowly lowered until the transmission rests on its support points.