How to Service and Repair the Blend Door Actuator for the Air Inlet Door on 2009 Ford E-250?

The process to repair the air door actuator starts with glove compartment removal through screw disassembly of its four securing elements. After taking the glove compartment off it is necessary to disconnect the vacuum connector which connects to the air inlet door vacuum control motor. Two screws retaining the vacuum control motor need removal before taking out the motor component. Reinstallation will follow the same order of step reversal that occurred in the disassembly process.

OEM 2009 Ford E-250 Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2009 Ford E-250 Temperature Door Actuator Part Number: XC2Z-19E616-AA
$62.10 MSRP: $102.18
You Save: $40.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
- Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 4.5 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2009 Ford E-250 Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-250 Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-250 Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-250 Blend Door Actuator Parts Q&A

Q: How to Service and Repair the Blend Door Actuator for the Air Inlet Door on 2009 Ford E-250?
A: The process to repair the air door actuator starts with glove compartment removal through screw disassembly of its four securing elements. After taking the glove compartment off it is necessary to disconnect the vacuum connector which connects to the air inlet door vacuum control motor. Two screws retaining the vacuum control motor need removal before taking out the motor component. Reinstallation will follow the same order of step reversal that occurred in the disassembly process.