How to Service and Repair the Brake Line on 2009 Ford E-250?

Service and repair of brake flexible hoses requires the first step to free the wheel speed sensor wiring harness from its hose attachment. After removal of the brake caliper flow bolt users should discard the two copper washers before tightening the bolt to 40 Nm (30 lb-ft). During installation users should use new washers. The brake tube fitting needs to be tightened to 17 Nm (150 lb-in) when reinstalling onto the brake flexible hose. Detach the retaining clip securing the brake flexible hose before pulling out the hose. The brake caliper needs bleeding following a reverse installation of all steps and return to original configuration. Secure brake system performance requires brake fluid that meets manufacturer requirements and using newly obtained clean fluid instead of recycled fluids to minimize possible system damage. Brake fluid spills require immediate washing of the affected painted or plastic areas using water because exposure to brake fluid can lead to damage. Use of all products requires following safety instructions on labels together with healthcare consultations to obtain medical emergency data found on MSDS products and failure to follow these guidelines could result in dangerous personal injuries.

OEM 2009 Ford E-250 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2009 Ford E-250 Flex Hose, Rear Driver Side
Part Number: 8C2Z-2A442-C
$60.11 MSRP: $98.91
You Save: $38.80 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Line, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: BRHR-79, 8C2Z-2A442-CL
- Item Weight: 2.60 Pounds
- Item Dimensions: 4.1 x 17.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2A442-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Flex Hose, Front Driver Side
Part Number: 8C2Z-2078-BL
$68.29 MSRP: $112.36
You Save: $44.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Base No.: 2078
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.3 x 3.0 x 22.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2078-BL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Flex Hose, Front Passenger Side
Part Number: 8C2Z-2078-BR
$64.55 MSRP: $108.36
You Save: $43.81 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Base No.: 2078
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.3 x 3.2 x 23.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2078-BR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Flex Hose, Driver Side
Part Number: 8C2Z-2A442-EL
Product Specifications
- Other Name: Hose Assembly; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Base No.: 2A442B
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.6 x 3.3 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2A442-EL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Flex Hose, Passenger Side
Part Number: 8C2Z-2A442-CR
Product Specifications
- Other Name: Hose Assembly; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Base No.: 2A442A
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 7.1 x 45.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2A442-CR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2009 Ford E-250 Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-250 Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-250 Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-250 Brake Line Parts Questions & Experts Answers

Q: How to Service and Repair the Brake Line on 2009 Ford E-250?
A: Service and repair of brake flexible hoses requires the first step to free the wheel speed sensor wiring harness from its hose attachment. After removal of the brake caliper flow bolt users should discard the two copper washers before tightening the bolt to 40 Nm (30 lb-ft). During installation users should use new washers. The brake tube fitting needs to be tightened to 17 Nm (150 lb-in) when reinstalling onto the brake flexible hose. Detach the retaining clip securing the brake flexible hose before pulling out the hose. The brake caliper needs bleeding following a reverse installation of all steps and return to original configuration. Secure brake system performance requires brake fluid that meets manufacturer requirements and using newly obtained clean fluid instead of recycled fluids to minimize possible system damage. Brake fluid spills require immediate washing of the affected painted or plastic areas using water because exposure to brake fluid can lead to damage. Use of all products requires following safety instructions on labels together with healthcare consultations to obtain medical emergency data found on MSDS products and failure to follow these guidelines could result in dangerous personal injuries.