How to remove and replace the brake caliper on 2009 Ford E-250?

The process requires using suspension fluid from the manufacturer's approved standards while avoiding the usage of drained fluid materials to prevent contamination and damage. You should start by taking off the tire together with the wheel. New copper washers should be applied to the brake caliper flow bolt before disconnecting it to move the brake hose aside while discarding the old washers. The brake caliper flow bolt should get tightened to 40 Nm (30 lb-ft) torques. The next step requires removal of the brake caliper anchor plate bolts along with its assembly while tightening the bolts to 225 Nm (166 lb-ft) during installation using a butterfly torque adapter like Snap-On(R) Stock # SBS26. Detach the brake caliper by first removing its guide pin bolts which need installation tightening at 61 Nm (45 lb-ft). Finish the operation by bleeding the brake caliper through reversal of removal steps. Note that brake fluid should never be applied to painted or plastic surfaces since damage might result but water can be used for immediate cleaning when spillage occurs.

OEM 2009 Ford E-250 Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Calipers found

View related parts
2009 Ford E-250 Caliper, Rear Passenger Side
Part Number: BC2Z-2552-A
$89.39 MSRP: $147.09
You Save: $57.70 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Passenger Side
- Replaces: BRCF-150, 8C2Z-2552-A
- Base No.: 2552
- Item Weight: 14.30 Pounds
- Item Dimensions: 3.7 x 7.2 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC2Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Caliper, Rear Driver Side
Part Number: BC2Z-2553-A
$112.63 MSRP: $189.09
You Save: $76.46 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Driver Side
- Replaces: 8C2Z-2553-A, BRCF-25
- Base No.: 2552
- Item Weight: 13.30 Pounds
- Item Dimensions: 3.7 x 7.2 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC2Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Caliper, Driver Side
Part Number: 8C2Z-2B121-CL
$91.85 MSRP: $144.18
You Save: $52.33 (37%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Brake Caliper Repair Kit; Brake Caliper; Caliper Assembly - Brake - Less Pads
- Manufacturer Note: Warranty Eligible
- Position: Driver Side
- Replaced by: 8C2Z-2B121-A
- Base No.: 2B120
- Item Weight: 20.80 Pounds
- Item Dimensions: 13.5 x 5.2 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2B121-CL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Caliper, Front Passenger Side
Part Number: 8C2Z-2B120-CR
$91.39 MSRP: $143.45
You Save: $52.06 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Passenger Side
- Replaced by: 8C2Z-2B120-A
- Base No.: 2B120
- Item Weight: 22.00 Pounds
- Item Dimensions: 13.6 x 5.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2B120-CR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Caliper, Front Driver Side
Part Number: 8C2Z-2B121-A
$91.85 MSRP: $144.18
You Save: $52.33 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Front Driver Side
- Replaces: 8C2Z-2B121-CL, BRCF-154
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Caliper, Front Passenger Side
Part Number: 8C2Z-2B120-A
$91.39 MSRP: $143.45
You Save: $52.06 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right
- Position: Front Passenger Side
- Replaces: 8C2Z-2B120-CR, BRCF-153
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Caliper, Rear Passenger Side
Part Number: 8C2Z-2552-A
$89.39 MSRP: $147.09
You Save: $57.70 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Passenger Side
- Replaced by: BC2Z-2552-A
- Base No.: 2552
- Item Weight: 13.90 Pounds
- Item Dimensions: 2.9 x 6.6 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2009 Ford E-250 Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-250 Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-250 Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-250 Brake Caliper Parts Questions & Experts Answers

Q: How to remove and replace the brake caliper on 2009 Ford E-250?
A: The process requires using suspension fluid from the manufacturer's approved standards while avoiding the usage of drained fluid materials to prevent contamination and damage. You should start by taking off the tire together with the wheel. New copper washers should be applied to the brake caliper flow bolt before disconnecting it to move the brake hose aside while discarding the old washers. The brake caliper flow bolt should get tightened to 40 Nm (30 lb-ft) torques. The next step requires removal of the brake caliper anchor plate bolts along with its assembly while tightening the bolts to 225 Nm (166 lb-ft) during installation using a butterfly torque adapter like Snap-On(R) Stock # SBS26. Detach the brake caliper by first removing its guide pin bolts which need installation tightening at 61 Nm (45 lb-ft). Finish the operation by bleeding the brake caliper through reversal of removal steps. Note that brake fluid should never be applied to painted or plastic surfaces since damage might result but water can be used for immediate cleaning when spillage occurs.