How to Service the Front ABS Sensor on 2009 Ford Edge?

The first step for servicing the front ABS sensor is removing the wheel along with the tire. After removing the retainers from the fender splash shield, place it aside. Detach the electrical connector from the ABS sensor while you remove its six pushpin fasteners. The front ABS sensor bolt does not need replacement until you remove both the bolt and the sensor. When assembling the ABS sensor, ensure tightness reaches 7 Nm (62 lb-in). It is essential to follow the specified harness routing for ABS sensors in order to safeguard the system during jounce and rebound movements of the vehicle. Only reverse the procedures for removal to finish the installation process.

OEM 2009 Ford Edge ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Sensors found

View related parts
2009 Ford Edge ABS Sensor, Front Passenger Side Part Number: DT4Z-2C204-AB
$47.41 MSRP: $75.29
You Save: $27.88 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; ABS Wheel Speed Sensor; ABS Speed Sensor; Front Speed Sensor
- Position: Front Passenger Side
- Replaces: 9T4Z-2C204-B, BRAB-358, DT4Z-2C204-A, BRAB-311
- Base No.: 2C204
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DT4Z-2C204-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Ford Edge ABS Sensor, Front Driver Side Part Number: DT4Z-2C205-AB
$51.57 MSRP: $86.42
You Save: $34.85 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; ABS Wheel Speed Sensor; ABS Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 9T4Z-2C205-B, BRAB-312, DT4Z-2C205-A, BRAB-359
- Base No.: 2C204
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DT4Z-2C205-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Ford Edge ABS Sensor, Rear Passenger Side Part Number: AT4Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; ABS Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Replaces: 7T4Z-2C190-D, 7T4Z-2C190-B
- Base No.: 2C190
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.4 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge ABS Sensor, Rear Driver Side Part Number: AT4Z-2C191-B
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; ABS Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Replaces: 7T4Z-2C191-B, 7T4Z-2C216-B
- Base No.: 2C190
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.3 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-2C191-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge ABS Sensor, Rear Driver Side Part Number: 9T4Z-2C190-B
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.9 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-2C190-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge ABS Sensor, Rear Passenger Side Part Number: 9T4Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.9 x 3.0 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS

2009 Ford Edge ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Edge ABS Sensor Parts Q&A

Q: How to Service the Front ABS Sensor on 2009 Ford Edge?
A: The first step for servicing the front ABS sensor is removing the wheel along with the tire. After removing the retainers from the fender splash shield, place it aside. Detach the electrical connector from the ABS sensor while you remove its six pushpin fasteners. The front ABS sensor bolt does not need replacement until you remove both the bolt and the sensor. When assembling the ABS sensor, ensure tightness reaches 7 Nm (62 lb-in). It is essential to follow the specified harness routing for ABS sensors in order to safeguard the system during jounce and rebound movements of the vehicle. Only reverse the procedures for removal to finish the installation process.