How to service the front ABS sensor on 2008 Ford Edge?

The service procedure for the front ABS sensor begins with tire and wheel removal. You should first remove both retainers which enables you to place the fender splash shield temporarily aside. Begin service on the ABS sensor by first disconnecting its electrical connector followed by removal of six fasteners using pushpins. The front ABS sensor bolt and the ABS sensor should be removed before installation where you should tighten the new sensor to 7 Nm (62 lb-in). The ABS sensor harness must receive proper routing according to specifications because vehicle jounce as well as rebound can potentially cause harm. Follow up the installation process by performing the steps in reverse order of removal.

OEM 2008 Ford Edge ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Sensors found

View related parts
2008 Ford Edge ABS Sensor, Front Passenger Side Part Number: DT4Z-2C204-AB
$47.41 MSRP: $75.29
You Save: $27.88 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; ABS Wheel Speed Sensor; ABS Speed Sensor; Front Speed Sensor
- Position: Front Passenger Side
- Replaces: 9T4Z-2C204-B, BRAB-358, DT4Z-2C204-A, BRAB-311
- Base No.: 2C204
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DT4Z-2C204-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2008 Ford Edge ABS Sensor, Front Driver Side Part Number: DT4Z-2C205-AB
$51.57 MSRP: $86.42
You Save: $34.85 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; ABS Wheel Speed Sensor; ABS Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 9T4Z-2C205-B, BRAB-312, DT4Z-2C205-A, BRAB-359
- Base No.: 2C204
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DT4Z-2C205-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2008 Ford Edge ABS Sensor, Rear Passenger Side Part Number: AT4Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; ABS Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Replaces: 7T4Z-2C190-D, 7T4Z-2C190-B
- Base No.: 2C190
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.4 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge ABS Sensor, Rear Driver Side Part Number: AT4Z-2C191-B
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; ABS Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Replaces: 7T4Z-2C191-B, 7T4Z-2C216-B
- Base No.: 2C190
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.3 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-2C191-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge ABS Sensor, Rear Passenger Side Part Number: 8T4Z-2C190-B
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: 7T4Z-2C190-C, 7T4Z-2C190-AA
- Base No.: 2C190
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T4Z-2C190-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge ABS Sensor, Rear Driver Side Part Number: 8T4Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; ABS Wheel Speed Sensor; ABS Speed Sensor; Rear Speed Sensor
- Position: Rear Driver Side
- Replaces: 7T4Z-2C191-A, 7T4Z-2C216-AA
- Base No.: 2C190
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.5 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T4Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus | 6 Cyl 3.5 L GAS

2008 Ford Edge ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Edge ABS Sensor Parts Q&A

Q: How to service the front ABS sensor on 2008 Ford Edge?
A: The service procedure for the front ABS sensor begins with tire and wheel removal. You should first remove both retainers which enables you to place the fender splash shield temporarily aside. Begin service on the ABS sensor by first disconnecting its electrical connector followed by removal of six fasteners using pushpins. The front ABS sensor bolt and the ABS sensor should be removed before installation where you should tighten the new sensor to 7 Nm (62 lb-in). The ABS sensor harness must receive proper routing according to specifications because vehicle jounce as well as rebound can potentially cause harm. Follow up the installation process by performing the steps in reverse order of removal.