FordParts
My Garage
My Account
Cart
OEM 2009 Ford Escape Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Starters found
2009 Ford Escape Starter Part Number: 9E5Z-11002-A
$289.82 MSRP: $480.00You Save: $190.18 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor
- Replaces: BE5Z-11002-B, SA-1019
- Base No.: 11002
- Item Weight: 9.20 Pounds
- Item Dimensions: 8.0 x 6.1 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-11002-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Starter Part Number: BB5Z-11002-A
Product Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor
- Replaces: 6S4Z-11002-AA, 5S4Z-11002-A, SA-934
- Base No.: 11002
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.4 x 5.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BB5Z-11002-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Starter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Starter available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Starter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Escape Starter Parts Q&A
- Q: How to service the starter motor on a 2.5L engine on 2009 Ford Escape?A: A 2.5L vehicle starting motor service process starts with hoisting the vehicle into neutral position while disconnecting the battery ground cable. Follow the next step by first removing five bolts that attach with the pin-type retainer and right-hand splash shield then return the bolt torques back to 9 Nm (80 lb-in). Follow these steps for the reinstallation of the starter solenoid wire by disconnecting the nut while tightening it to 5 Nm (44 lb-in). The starter solenoid battery cable nut requires removal for starter motor solenoid terminal cover and cable detachment before securing these connections to 12 Nm (106 lb-in). By removing the ground wire nut you should set this ground wire aside before securement at 25 Nm (18 lb-ft) during reinstallation. After removing both stud bolts and the starter motor you can reinstall the bolts to 35 Nm (26 lb-ft) while following the exact removal process to finish installation.