How to service the front ABS sensor on 2009 Ford Expedition?

Service begins with the front ABS sensor by taking off the wheel together with the tire. First, disconnect the electrical connector of the ABS sensor before unscrewing the harness bolt, then detach the retainers. It is crucial to tighten the harness bolt to 12 Nm during reinstallation (106 lb-in). After ensuring the brake hose's safety, carefully ensure that the caliper will not damage the brake hose. Remove the two caliper anchor bolts, then set aside the parts, including the caliper and its pads, along with the anchor plate, while using mechanic's wire to support the caliper. During caliper installation, users should tighten the anchor bolts to 200 Nm (148 lb-ft). After removing the brake disc, the front ABS sensor bolt needs to be taken off before reinstalling both components with a torque setting of 18 Nm (159 lb-in). Follow up the installation process by returning to the steps of removal in the opposite order.

OEM 2009 Ford Expedition ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Sensors found

View related parts
2009 Ford Expedition ABS Sensor, Rear Driver Side
Part Number: 7L1Z-2C190-E
$89.04 MSRP: $146.51
You Save: $57.47 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Rear Speed Sensor
- Position: Rear Driver Side
- Replaces: 7L1Z-2C190-D, 7L1Z-2C204-D
- Base No.: 2C190
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 2.6 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2C190-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition ABS Sensor, Front Passenger Side
Part Number: 7L1Z-2C204-F
$76.75 MSRP: $126.29
You Save: $49.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Front Passenger Side
- Replaces: 7L1Z-2C204-B
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.6 x 2.6 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2C204-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition ABS Sensor Parts Questions & Experts Answers

Q: How to service the front ABS sensor on 2009 Ford Expedition?
A: Service begins with the front ABS sensor by taking off the wheel together with the tire. First, disconnect the electrical connector of the ABS sensor before unscrewing the harness bolt, then detach the retainers. It is crucial to tighten the harness bolt to 12 Nm during reinstallation (106 lb-in). After ensuring the brake hose's safety, carefully ensure that the caliper will not damage the brake hose. Remove the two caliper anchor bolts, then set aside the parts, including the caliper and its pads, along with the anchor plate, while using mechanic's wire to support the caliper. During caliper installation, users should tighten the anchor bolts to 200 Nm (148 lb-ft). After removing the brake disc, the front ABS sensor bolt needs to be taken off before reinstalling both components with a torque setting of 18 Nm (159 lb-in). Follow up the installation process by returning to the steps of removal in the opposite order.