How to remove and replace the front parking brake cable on 2009 Ford Expedition?

The first step when changing the front parking brake cable begins with taking off the parking brake control. A hoist should stabilize the vehicle while it remains in the NEUTRAL gear. The front park brake cable P-clip-to-frame bolt should be radically tightened to 18 Nm (159 lb-in) before the reinstallation occurs. Disconnect the front parking brake cable and conduit through three steps which include prying rubber seal from front floor pan after bracket retainer compression for conduit release from bracket followed by front cable and conduit extraction from cable union. The installation ends with the reverse steps of removal.

OEM 2009 Ford Expedition Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2009 Ford Expedition Rear Cable, Passenger Side
Part Number: AL1Z-2A635-A
$66.28 MSRP: $111.27
You Save: $44.99 (41%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 8L1Z-2A635-A
- Base No.: 2A635A
- Item Weight: 3.90 Pounds
- Item Dimensions: 16.3 x 13.8 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Front Cable
Part Number: 8L1Z-2853-A
$35.63 MSRP: $49.29
You Save: $13.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Base No.: 2853
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.9 x 8.4 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-2853-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Rear Cable, Driver Side
Part Number: 7L1Z-2A635-C
$50.49 MSRP: $80.18
You Save: $29.69 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 2L1Z-2A635-AB, 5L1Z-2A635-B, 6L1Z-2A635-AB
- Base No.: 2A635
- Item Weight: 2.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2A635-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Parking Brake Cable Parts Questions & Experts Answers

Q: How to remove and replace the front parking brake cable on 2009 Ford Expedition?
A: The first step when changing the front parking brake cable begins with taking off the parking brake control. A hoist should stabilize the vehicle while it remains in the NEUTRAL gear. The front park brake cable P-clip-to-frame bolt should be radically tightened to 18 Nm (159 lb-in) before the reinstallation occurs. Disconnect the front parking brake cable and conduit through three steps which include prying rubber seal from front floor pan after bracket retainer compression for conduit release from bracket followed by front cable and conduit extraction from cable union. The installation ends with the reverse steps of removal.