My Garage
Cart

OEM 2009 Ford Expedition Blower Motor Resistor

Heater Blower Motor Resistor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

  • 2009 Ford Expedition Blower Motor Resistor Diagram - 3F2Z-18591-AA
    View related parts

    2009 Ford Expedition Blower Motor Resistor, Front Part Number: 3F2Z-18591-AA

    $43.05 MSRP: $69.45
    You Save: $26.40 (39%)
    ADD TO CART
    Product Specifications
    • Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor; HVAC Blower Motor Resistor
    • Position: Front
    • Base No.: 19A706
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 6.3 x 4.0 x 4.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3F2Z-18591-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Expedition Submodels:
    • Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
  • 2009 Ford Expedition Blower Motor Resistor Diagram - 7L1Z-19A706-A
    View related parts

    2009 Ford Expedition Blower Motor Resistor, Rear Part Number: 7L1Z-19A706-A

    $44.96 MSRP: $71.40
    You Save: $26.44 (38%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Rear; Resistor
    • Position: Rear
    • Base No.: 19A706
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 4.3 x 4.3 x 3.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7L1Z-19A706-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Expedition Submodels:
    • EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Platinum | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
  • 2009 Ford Expedition Blower Motor Resistor - 8L1Z-19A706-A
    2009 Ford Expedition Blower Motor Resistor Diagram - 8L1Z-19A706-A
    View related parts

    2009 Ford Expedition Blower Motor Resistor, Rear Part Number: 8L1Z-19A706-A

    $34.46 MSRP: $46.89
    You Save: $12.43 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Rear; Resistor
    • Position: Rear
    • Base No.: 19A706
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 4.3 x 3.4 x 4.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8L1Z-19A706-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Expedition Submodels:
    • Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition Blower Motor Resistor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Blower Motor Resistor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Blower Motor Resistor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Blower Motor Resistor Parts Q&A

  • Q: How to service the auxiliary blower motor resistor on 2009 Ford Expedition?
    A: The procedure to service the auxiliary blower motor resistor starts with taking off the right-hand quarter trim panel access panel. Service of the blower motor resistor starts with disconnecting electrical connectors from the blower motor resistor for Expedition and Navigator models. After that you must remove the two screws securing the resistor before extracting it. The procedure for Expedition EL and Navigator L includes disconnecting electrical connector followed by screw removal that secures the blower motor resistor before detaching both clips to remove the resistor. Follow the exact opposite steps that were used for removal to achieve installation completion.