How to service the rear window wiper motor on 2009 Ford Expedition?

You must first remove the rear wiper pivot arm combined with the dust boot cover before servicing the rear window wiper motor. Start by removing the nut inside together with the rear window glass handle. Then open the liftgate glass before you continue. Begin by removing the nuts from the rear window striker as well as wiper pivot shaft assembly before removing the liftgate trim panel. Customers should first close the liftgate and access the liftgate window glass latch if planning to install a new rear wiper motor. First disconnect the electrical connector before removing the bolts which enable removal of the rear window wiper motor. The first step for installation is to install the liftgate window glass latch followed by tightening its bolts to 8 Nm (71 lb-in) while ensuring the striker engages the latch audibly. The rear window wiper striker and pivot shaft assembly requires alignment with the wiper motor through use of a provided alignment tool to achieve correct fitting and reach secure attachment. Fasten the rear wiper motor with bolts at 11 Nm (97 lb-in) torque before connecting all electric wires. After closing the liftgate glass properly you should open it to install the rear window wiper striker and wiper pivot arm mounting assembly nuts before tightening them to 6 Nm (53 lb-in). Secure the rear window glass handle and its nut by torquing it to 18 Nm (159 lb-in) then put back the dust boot cover and rear wiper pivot arm. Begin by opening the liftgate and then removing two tools followed by opening the liftgate glass before final installation of the liftgate trim panel. Normal operation of the liftgate and liftgate glass should be tested.

OEM 2009 Ford Expedition Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Motors found

View related parts
2009 Ford Expedition Front Transmission Part Number: 9L1Z-17500-A
$479.39 MSRP: $796.00
You Save: $316.61 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Linkage; Wiper Motor; Motor & Linkage; Wiper Linkage
- Manufacturer Note: Windshield Wiper, Includes Motor And Linkage
- Base No.: 17508A
- Item Weight: 11.00 Pounds
- Item Dimensions: 43.3 x 12.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-17500-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Wiper Motor Part Number: 9L1Z-17508-B
Product Specifications
- Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor
- Manufacturer Note: Service Kit
- Base No.: 17508
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.4 x 6.3 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-17508-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Wiper Motor Part Number: 8L1Z-17508-D
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor; Front Motor; Motor
- Replaces: 8L1Z-17508-C
- Base No.: 17508B
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.1 x 6.3 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-17508-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Front Transmission Part Number: 8L1Z-17508-A
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Linkage; Wiper Motor; Motor & Linkage; Front Motor; Wiper Linkage
- Manufacturer Note: Windshield Wiper, Includes Motor And Linkage
- Replaces: 6L1Z-17508-BA, 2L1Z-17508-AB
- Base No.: 17508A
- Item Weight: 7.10 Pounds
- Item Dimensions: 10.4 x 9.0 x 38.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Wiper Motor Part Number: 6L1Z-17508-AA
Product Specifications
- Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor; Motor
- Manufacturer Note: Service Kit
- Replaces: 2L1Z-17508-BA
- Base No.: 17508
- Item Weight: 4.60 Pounds
- Item Dimensions: 5.9 x 6.2 x 15.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L1Z-17508-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Wiper Motor Part Number: 9L1Z-17508-A
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor; Front Motor
- Base No.: 17508B
- Item Weight: 4.20 Pounds
- Item Dimensions: 8.5 x 6.4 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Wiper Motor Parts Q&A

Q: How to service the rear window wiper motor on 2009 Ford Expedition?
A: You must first remove the rear wiper pivot arm combined with the dust boot cover before servicing the rear window wiper motor. Start by removing the nut inside together with the rear window glass handle. Then open the liftgate glass before you continue. Begin by removing the nuts from the rear window striker as well as wiper pivot shaft assembly before removing the liftgate trim panel. Customers should first close the liftgate and access the liftgate window glass latch if planning to install a new rear wiper motor. First disconnect the electrical connector before removing the bolts which enable removal of the rear window wiper motor. The first step for installation is to install the liftgate window glass latch followed by tightening its bolts to 8 Nm (71 lb-in) while ensuring the striker engages the latch audibly. The rear window wiper striker and pivot shaft assembly requires alignment with the wiper motor through use of a provided alignment tool to achieve correct fitting and reach secure attachment. Fasten the rear wiper motor with bolts at 11 Nm (97 lb-in) torque before connecting all electric wires. After closing the liftgate glass properly you should open it to install the rear window wiper striker and wiper pivot arm mounting assembly nuts before tightening them to 6 Nm (53 lb-in). Secure the rear window glass handle and its nut by torquing it to 18 Nm (159 lb-in) then put back the dust boot cover and rear wiper pivot arm. Begin by opening the liftgate and then removing two tools followed by opening the liftgate glass before final installation of the liftgate trim panel. Normal operation of the liftgate and liftgate glass should be tested.