How to Remove and Replace the Brake Disc on 2009 Ford Explorer?

Before beginning brake rotor/disc replacement ensure that the brake caliper along with brake pads and anchor plate assembly remain detached from their positions on the brake hose to avoid damages to both components. Legitimately detach the two brake caliper anchor plate bolts before placing the assembly on mechanic's wire support. Use the rust penetrant on the friction surfaces between the brake disc and hub to make disc removal easier. The specified parts cleaner must be utilized to eliminate all rust and foreign materials from both brake wheel hub and attached brake disc before installation. Before installing the new brake disc apply a thin layer of anti-seize lubricant on the hub flange according to manufacturer specification. The final step includes repositioning the brake caliper and brake pads together with the anchor plate before installing and tightening the two brake caliper anchor plate bolts to 165 Nm (122 lb-ft).

OEM 2009 Ford Explorer Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Discs found

View related parts
2009 Ford Explorer Rotor, Rear Part Number: 6L2Z-2C026-B
$82.86 MSRP: $124.98
You Save: $42.12 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaced by: 6L2Z-2C026-C
- Base No.: 2C026
- Item Weight: 15.50 Pounds
- Item Dimensions: 3.3 x 13.0 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2C026-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
2009 Ford Explorer Rotor, Front Part Number: 6U2Z-1V125-CB
$70.38 MSRP: $108.32
You Save: $37.94 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: 6U2Z-1V125-CC
- Base No.: 1125
- Item Weight: 23.00 Pounds
- Item Dimensions: 3.2 x 13.6 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-1V125-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2009 Ford Explorer Brake Disc

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Explorer Brake Disc Parts Q&A

Q: How to Remove and Replace the Brake Disc on 2009 Ford Explorer?
A: Before beginning brake rotor/disc replacement ensure that the brake caliper along with brake pads and anchor plate assembly remain detached from their positions on the brake hose to avoid damages to both components. Legitimately detach the two brake caliper anchor plate bolts before placing the assembly on mechanic's wire support. Use the rust penetrant on the friction surfaces between the brake disc and hub to make disc removal easier. The specified parts cleaner must be utilized to eliminate all rust and foreign materials from both brake wheel hub and attached brake disc before installation. Before installing the new brake disc apply a thin layer of anti-seize lubricant on the hub flange according to manufacturer specification. The final step includes repositioning the brake caliper and brake pads together with the anchor plate before installing and tightening the two brake caliper anchor plate bolts to 165 Nm (122 lb-ft).