How to properly bleed a brake caliper on 2009 Ford F-150?

When bleeding the brake caliper work only with fresh brake fluid which follows manufacturer guidelines while preventing the use of drained fluid to avoid damage and contamination. Success during brake bleeding requires a full brake master cylinder to protect device components and ensure stable braking operations. Brake fluid spills should always be cleaned from painted or plastic surfaces by immediately washing with water. Start your work by taking away the bleeder screw cap then install a box-end wrench on the bleeder screw. A rubber drain hose connects to the bleeder screw which has its open end submerged in a container containing specified brake fluid. An assistant should pedal the brakes twice before maintaining constant force on the pedal. The bleeder screw should be loosened until brake fluid streams out as the assistant keeps brake pedal pressure steady before screwing the bleeder tight. The procedure should be repeated again once we observe a fluid stream free from bubbles while draining only the brake reservoir when necessary. After pulling out the rubber hose complete the procedure by tightening the bleeder screw to specifications before replacing its cap.

OEM 2009 Ford F-150 Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2009 Ford F-150 Caliper, Front
Part Number: 7L3Z-2B121-A
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Left, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: For Banjo Washer Refer To Brake Line Section
- Position: Front
- Replaces: 6L3Z-2B121-AA
- Base No.: 2B120
- Item Weight: 14.40 Pounds
- Item Dimensions: 4.8 x 7.4 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX4, King Ranch, Lariat, Platinum, STX, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX
View related parts
2009 Ford F-150 Caliper, Rear Driver Side
Part Number: 6L3Z-2553-AC
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Rear Driver Side
- Base No.: 2552
- Item Weight: 6.20 Pounds
- Item Dimensions: 6.8 x 3.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-2553-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2009 Ford F-150 Caliper, Rear Passenger Side
Part Number: 6L3Z-2552-AC
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Rear Passenger Side
- Base No.: 2552
- Item Weight: 6.20 Pounds
- Item Dimensions: 6.8 x 3.6 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-2552-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2009 Ford F-150 Caliper, Front Passenger Side
Part Number: 7L3Z-2B120-A
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Left, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: For Banjo Washer Refer To Brake Line Section
- Position: Front Passenger Side
- Replaces: 6L3Z-2B120-AA
- Base No.: 2B120
- Item Weight: 14.00 Pounds
- Item Dimensions: 4.8 x 7.2 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX4, King Ranch, Lariat, Platinum, STX, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX

2009 Ford F-150 Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-150 Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-150 Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-150 Brake Caliper Parts Questions & Experts Answers

Q: How to properly bleed a brake caliper on 2009 Ford F-150?
A: When bleeding the brake caliper work only with fresh brake fluid which follows manufacturer guidelines while preventing the use of drained fluid to avoid damage and contamination. Success during brake bleeding requires a full brake master cylinder to protect device components and ensure stable braking operations. Brake fluid spills should always be cleaned from painted or plastic surfaces by immediately washing with water. Start your work by taking away the bleeder screw cap then install a box-end wrench on the bleeder screw. A rubber drain hose connects to the bleeder screw which has its open end submerged in a container containing specified brake fluid. An assistant should pedal the brakes twice before maintaining constant force on the pedal. The bleeder screw should be loosened until brake fluid streams out as the assistant keeps brake pedal pressure steady before screwing the bleeder tight. The procedure should be repeated again once we observe a fluid stream free from bubbles while draining only the brake reservoir when necessary. After pulling out the rubber hose complete the procedure by tightening the bleeder screw to specifications before replacing its cap.