Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2004-2008 Ford F-150 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1998-2003 Ford F-150 | Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
Manufacturer Note: Warranty Eligible
Position: Front Driver Side
Replaces: BRCF-323, FL3Z-2B121-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2015-2017 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Raptor, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
| Page 1 of 3 |Next >
1-20 of 50 Results
Ford F-150 Brake Caliper
Welcome to our website where you can discover high-quality, genuine Ford F-150 Brake Caliper. We offer an extensive inventory of OEM Ford F-150 Brake Caliper at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to properly bleed a brake caliper on Ford F-150?
A: In order to bleed the brake caliper, follow the manufacturer specifications of using clean brake fluid and ensure that the master cylinder is full. Prevent spills on surfaces. Take off the bleeder screw cap, put a hose on the screw and have an assistant pump the Brake Pedal. Continue until clear fluid runs out, tighten screw and cap.
Q: How to Properly Service and Repair a Brake Caliper on Ford F-150?
A: To maintain the brake caliper, wipe it out and empty brake fluid. Clamped in place so that the piston is in a vise and low air pressure will be used to drive the piston out. Take off the seal and dust boot, and do not hone the bore. Apply DOT 3 brake fluid, and replace parts.