FordParts
My Garage
My Account
Cart
OEM 2009 Ford F-150 Parking Assist Distance Sensor
Parking Assist Distance Sensor Guide- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Parking Assist Distance Sensor found
2009 Ford F-150 Reverse Sensor, Rear Part Number: 9L3Z-15K859-D
$42.95 MSRP: $61.45You Save: $18.50 (31%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Parking Aid System; Parking Aid Sensor, Rear; Sensor; Parking Aid Sensor
- Position: Rear
- Replaces: 9L3Z-15K859-C
- Base No.: 15K859
- Item Weight: 0.30 Pounds
- Item Dimensions: 11.4 x 9.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 9L3Z-15K859-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford F-150 Parking Assist Distance Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-150 Parking Assist Distance Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-150 Parking Assist Distance Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford F-150 Parking Assist Distance Sensor Parts Q&A
- Q: How to service and repair the parking assist distance sensor on 2009 Ford F-150?A: Starting the parking assist distance sensor repair process requires the disconnect of its electrical connector from the parking aid sensor. By depressing the retaining tabs you can free up the sensor from the sensor bezel before extracting it through the rear bumper opening. To install the new sensor place it into the bezel opening and deploy it until the retaining tabs achieve a locking position before connecting the electrical connector. The first step after installation requires using a scan tool to verify both parking aid sensor PIDs show no object detected and that attenuation PIDs show readings of 0 to 1.5 ms. The procedure ends with performing tests on both azimuth and elevation.