How to remove and install the pilot bearing in a transmission on 2009 Ford F-250 Super Duty?

The pilot bearing removal process requires the initial removal of clutch disc and pressure plate first. The combination of a Pilot Bearing Remover and an Impact Slide Hammer will detach and dispose of the transmission input shaft pilot bearing. The new pregreased transmission input shaft pilot bearing can be installed through the combination of a soft-face hammer and the Pilot Bearing Replacer for gasoline engines. During diesel engine servicing the same pregreased pilot bearing gets installed with a soft-face hammer along with a suitable driver. Reinstall the clutch disc along with the pressure plate at the end of the installation process.

OEM 2009 Ford F-250 Super Duty Pilot Bearing

Clutch Pilot Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pilot Bearing found

View related parts
2009 Ford F-250 Super Duty Pilot Bearing Part Number: 1C3Z-7600-AB
$16.63 MSRP: $24.20
You Save: $7.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly - Needle; Pilot Bearings
- Base No.: 7600
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C3Z-7600-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2009 Ford F-250 Super Duty Pilot Bearing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-250 Super Duty Pilot Bearing available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-250 Super Duty Pilot Bearing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-250 Super Duty Pilot Bearing Parts Q&A

Q: How to remove and install the pilot bearing in a transmission on 2009 Ford F-250 Super Duty?
A: The pilot bearing removal process requires the initial removal of clutch disc and pressure plate first. The combination of a Pilot Bearing Remover and an Impact Slide Hammer will detach and dispose of the transmission input shaft pilot bearing. The new pregreased transmission input shaft pilot bearing can be installed through the combination of a soft-face hammer and the Pilot Bearing Replacer for gasoline engines. During diesel engine servicing the same pregreased pilot bearing gets installed with a soft-face hammer along with a suitable driver. Reinstall the clutch disc along with the pressure plate at the end of the installation process.