How to remove and replace the front bumper cover on 2009 Ford Flex?

Cautiously remove and install the front bumper cover only when your vehicle is in neutral position on a hoist. Start by disconnecting the 4 upper front bumper cover scrivets followed by the 2 upper front bumper cover bolts then tighten their bolts to 6 Nm (53 lb-in) when reinstalling. The second step involves extracting the 2 front bumper cover scrivets which are situated beneath the license plate area. Remove the front lower air deflector with the bumper cover since you will need to also take out the 3 lower air deflector-to-radiator grille support scrivets. The 3 sets of 2 Nm (18 lb-in) tightened screws secure the front bumper cover wheel house along each side of the vehicle while removing the screws requires 6 pieces. The installation requires disconnecting the fog lamps and front parking aid electrical connectors only when fitted. The operation for releasing the bumper cover begins with a pull motion toward the rear upper side of the bumper cover mounting reinforcement while disassembling the part. Examine the bumper cover mounting reinforcements for harm before deciding on replacement if needed. Reinstallation of a new bumper cover begins with returning components to their original positions during removal while following the opposite steps to install the new component.

OEM 2009 Ford Flex Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Bumpers found

View related parts
2009 Ford Flex Impact Bar, Front Part Number: DG1Z-17757-A
$350.48 MSRP: $411.72
You Save: $61.24 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: DG1Z-17757-B, 8A8Z-17757-A, AA8Z-17757-A, DG1Z-17757-C
- Base No.: 17757
- Item Weight: 13.80 Pounds
- Item Dimensions: 55.3 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG1Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Flex Submodels:
- Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Flex Impact Bar, Rear Part Number: DE9Z-17906-A
$304.16 MSRP: $473.77
You Save: $169.61 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Replaces: 8A8Z-17906-A
- Base No.: 17906
- Item Weight: 16.40 Pounds
- Item Dimensions: 56.4 x 5.9 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DE9Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Flex Submodels:
- Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Flex Bumper Cover, Front Part Number: 8A8Z-17D957-APTM
$326.65 MSRP: $479.67
You Save: $153.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 15.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-17D957-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Flex Submodels:
- Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Flex Bumper Cover, Rear Part Number: 8A8Z-17K835-BPTM
$216.72 MSRP: $318.23
You Save: $101.51 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Base No.: 17K835
- Item Weight: 13.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-17K835-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Flex Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Flex Bumper Cover, Rear Part Number: 8A8Z-17K835-APTM
$349.16 MSRP: $512.72
You Save: $163.56 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Base No.: 17K835
- Item Weight: 13.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-17K835-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Flex Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS

2009 Ford Flex Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Flex Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Flex Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Flex Bumper Parts Q&A

Q: How to remove and replace the front bumper cover on 2009 Ford Flex?
A: Cautiously remove and install the front bumper cover only when your vehicle is in neutral position on a hoist. Start by disconnecting the 4 upper front bumper cover scrivets followed by the 2 upper front bumper cover bolts then tighten their bolts to 6 Nm (53 lb-in) when reinstalling. The second step involves extracting the 2 front bumper cover scrivets which are situated beneath the license plate area. Remove the front lower air deflector with the bumper cover since you will need to also take out the 3 lower air deflector-to-radiator grille support scrivets. The 3 sets of 2 Nm (18 lb-in) tightened screws secure the front bumper cover wheel house along each side of the vehicle while removing the screws requires 6 pieces. The installation requires disconnecting the fog lamps and front parking aid electrical connectors only when fitted. The operation for releasing the bumper cover begins with a pull motion toward the rear upper side of the bumper cover mounting reinforcement while disassembling the part. Examine the bumper cover mounting reinforcements for harm before deciding on replacement if needed. Reinstallation of a new bumper cover begins with returning components to their original positions during removal while following the opposite steps to install the new component.