How to Inspect and Repair the Air Bag System After a Collision to Ensure Safety on 2009 Ford Focus?

Periodic inspection and repair of the Supplemental Restraint System (SRS) follow any vehicle collision to guarantee safety. When performing road tests exclude any restraint system diagnostic equipment to avoid a SRS device failure in crashes because failure could result in severe injury or death. A vehicle requires all deployed air bag components such as modules and pretensioners must undergo replacement with new ones when combined with fresh impact sensors and a new Restraints Control Module following WTS B1231 detection. The necessary modules should receive a complete DTC clearance following all repair work. A vehicle with Occupant Classification Sensor (OCS) needs inspection of the passenger side floorpan for damage following any collision. This inspection requires OCSM analysis for DTC B1231/B1193:00 storage. When replacing rail-type OCS system rails or weight sensor bolt-type seat track assemblies that carry OCS system weight sensors always clear the DTCs before executing the OCS System Reset. The DTC B1231 usually does not persist in Bladder-type OCSMs after deployment but you must inspect the system components and apply replacement components when needed. Installing a new Clock Spring should be part of your procedure if deployment of the driver air bag module occurred. At the same time repair or replace damaged impact sensor mounts and hardware. The installation of new safety belt systems must include retractors and buckles and height adjusters when the driver or front passenger safety belt pretensioners deploy. A systematic inspection should be conducted to assess vehicle damage while paying attention to the steering column and instrument panel components and seats and safety belts and SRS wiring. All noted damaged parts must be repaired or replaced.

OEM 2009 Ford Focus Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Bags found

View related parts
2009 Ford Focus Inflator Curtain, Passenger Side Part Number: 9S4Z-54042D94-A
$450.45 MSRP: $623.16
You Save: $172.71 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Curtain Air Bag, Right; Head Air Bag
- Position: Passenger Side
- Base No.: <042D94
- Item Weight: 9.50 Pounds
- Item Dimensions: 83.2 x 10.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9S4Z-54042D94-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Inflator Curtain, Driver Side Part Number: 9S4Z-54042D95-A
$386.11 MSRP: $534.14
You Save: $148.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Curtain Air Bag, Left; Head Air Bag
- Position: Driver Side
- Base No.: <042D94
- Item Weight: 11.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9S4Z-54042D95-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Side Impact Inflator Module, Front Driver Side Part Number: 8S4Z-54611D11-A
$177.42 MSRP: $245.45
You Save: $68.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Seat Air Bag, Front Left; Front Seat Air Bag
- Position: Front Driver Side
- Base No.: <611D10
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.2 x 5.9 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-54611D11-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Inflator Curtain, Driver Side Part Number: 9S4Z-63042D95-A
$127.96 MSRP: $177.02
You Save: $49.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Curtain Air Bag, Left; Head Air Bag
- Position: Driver Side
- Base No.: <042D94
- Item Weight: 11.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9S4Z-63042D95-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- SE, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Passenger Air Bag, Upper Part Number: 9S4Z-54044A74-A
$104.71 MSRP: $144.86
You Save: $40.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Manufacturer Note: No Airbag Door. Order Instrument Panel
- Position: Upper
- Replaces: 8S4Z-54044A74-A
- Base No.: <044A74
- Item Weight: 12.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9S4Z-54044A74-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Side Impact Inflator Module, Front Passenger Side Part Number: 8S4Z-54611D10-A
$101.39 MSRP: $140.26
You Save: $38.87 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Seat Air Bag, Front Right; Front Seat Air Bag
- Position: Front Passenger Side
- Base No.: <611D10
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-54611D10-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Inflator Curtain, Passenger Side Part Number: 9S4Z-63042D94-A
Product Specifications
- Other Name: Module - Air Bag; Curtain Air Bag, Right; Head Air Bag
- Position: Passenger Side
- Base No.: <042D94
- Item Weight: 11.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9S4Z-63042D94-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- SE, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Driver Inflator Module, Charcoal Black Part Number: 8S4Z-54043B13-AB
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Driver Air Bag
- Manufacturer Note: (-W*)
- Base No.: <043B13
- Item Weight: 2.60 Pounds
- Item Dimensions: 10.0 x 6.1 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-54043B13-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Driver Inflator Module, Gray Part Number: 8S4Z-54043B13-AA
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Driver Air Bag
- Manufacturer Note: (-S*)
- Base No.: <043B13
- Item Weight: 4.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-54043B13-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2009 Ford Focus Air Bag

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Air Bag available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Air Bag as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Air Bag Parts Q&A

Q: How to Inspect and Repair the Air Bag System After a Collision to Ensure Safety on 2009 Ford Focus?
A: Periodic inspection and repair of the Supplemental Restraint System (SRS) follow any vehicle collision to guarantee safety. When performing road tests exclude any restraint system diagnostic equipment to avoid a SRS device failure in crashes because failure could result in severe injury or death. A vehicle requires all deployed air bag components such as modules and pretensioners must undergo replacement with new ones when combined with fresh impact sensors and a new Restraints Control Module following WTS B1231 detection. The necessary modules should receive a complete DTC clearance following all repair work. A vehicle with Occupant Classification Sensor (OCS) needs inspection of the passenger side floorpan for damage following any collision. This inspection requires OCSM analysis for DTC B1231/B1193:00 storage. When replacing rail-type OCS system rails or weight sensor bolt-type seat track assemblies that carry OCS system weight sensors always clear the DTCs before executing the OCS System Reset. The DTC B1231 usually does not persist in Bladder-type OCSMs after deployment but you must inspect the system components and apply replacement components when needed. Installing a new Clock Spring should be part of your procedure if deployment of the driver air bag module occurred. At the same time repair or replace damaged impact sensor mounts and hardware. The installation of new safety belt systems must include retractors and buckles and height adjusters when the driver or front passenger safety belt pretensioners deploy. A systematic inspection should be conducted to assess vehicle damage while paying attention to the steering column and instrument panel components and seats and safety belts and SRS wiring. All noted damaged parts must be repaired or replaced.