How to Service and Repair Coil Springs on 2009 Ford Focus?

Service and repair operations on the coil spring begin with wheel and tire removal and subsequent removal of the stabilizer bar nut together with bushings then stabilizer bar links and spacers from both sides of the stabilizer bar followed by discarding the nuts and bushings. A suitable jack must support the rear lower arm and elevate it to a height of 32 mm (1.25 in). Lieutenant caution is needed since the coil spring handles extreme tension; improper handling will produce severe personal injury. Begin the process by detaching the rearward lower arm outboard bolt then lower the rear lower arm while also discarding the jack to acquire the spring. Begin by putting aside the stabilizer bar and placing the rear lower control arm into its lowered position to inspect upper and lower spring seats before adopting new ones when necessary. Correct placement of the upper spring seat must happen first before installing the spring ends to contact both the upper and lower spring seats. To add the spring start by putting it into the upper spring mount and making it line up with the lower arm. Inspect the spring through the drain hole to verify its proper placement which allows it to butt against the rear lower arm spring stop and become visible. The installation procedure should stop before tightening the rearward lower arm outboard bolt. Insert a suitable jack under the rear lower arm to lift it before putting in the new rearward lower arm outboard bolt which should be tightened till it reaches a secure position. Install the new nut and bushings to the stabilizer bar links together with spacers while tightening them to 15 Nm (133 lb-in). After lowering the vehicle until it rests on the wheels and tires the mechanic should tighten the final bolt on the rearward lower arm outboard to 115 Nm (85 lb-ft).

OEM 2009 Ford Focus Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Coil Springs found

View related parts
2009 Ford Focus Coil Spring, Green, Rear Part Number: 8S4Z-5B669-G
$11.00 MSRP: $15.22
You Save: $4.22 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 4.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8S4Z-5B669-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Red, Rear Part Number: 8S4Z-5B669-F
$59.37 MSRP: $82.13
You Save: $22.76 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 4.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8S4Z-5B669-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Front Part Number: 8S4Z-5310-B
$22.75 MSRP: $31.47
You Save: $8.72 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs
- Position: Front
- Base No.: 5310
- Item Weight: 4.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8S4Z-5310-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Yellow, Rear Part Number: 8S4Z-5B669-E
$39.21 MSRP: $54.24
You Save: $15.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 4.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8S4Z-5B669-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Front Part Number: 9S4Z-5310-B
$22.24 MSRP: $30.77
You Save: $8.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9S4Z-5310-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Front Part Number: 8S4Z-5310-E
$115.88 MSRP: $178.33
You Save: $62.45 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs
- Position: Front
- Base No.: 5310
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8S4Z-5310-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Front Part Number: 8S4Z-5310-G
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 4.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8S4Z-5310-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Front Part Number: 9S4Z-5310-A
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 4.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9S4Z-5310-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Brown, Rear Part Number: 9S4Z-5560-A
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 4.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9S4Z-5560-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Coil Spring, Blue, Rear Part Number: 8S4Z-5B669-H
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 4.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8S4Z-5B669-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2009 Ford Focus Coil Springs

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Coil Springs available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Coil Springs as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Coil Springs Parts Q&A

Q: How to Service and Repair Coil Springs on 2009 Ford Focus?
A: Service and repair operations on the coil spring begin with wheel and tire removal and subsequent removal of the stabilizer bar nut together with bushings then stabilizer bar links and spacers from both sides of the stabilizer bar followed by discarding the nuts and bushings. A suitable jack must support the rear lower arm and elevate it to a height of 32 mm (1.25 in). Lieutenant caution is needed since the coil spring handles extreme tension; improper handling will produce severe personal injury. Begin the process by detaching the rearward lower arm outboard bolt then lower the rear lower arm while also discarding the jack to acquire the spring. Begin by putting aside the stabilizer bar and placing the rear lower control arm into its lowered position to inspect upper and lower spring seats before adopting new ones when necessary. Correct placement of the upper spring seat must happen first before installing the spring ends to contact both the upper and lower spring seats. To add the spring start by putting it into the upper spring mount and making it line up with the lower arm. Inspect the spring through the drain hole to verify its proper placement which allows it to butt against the rear lower arm spring stop and become visible. The installation procedure should stop before tightening the rearward lower arm outboard bolt. Insert a suitable jack under the rear lower arm to lift it before putting in the new rearward lower arm outboard bolt which should be tightened till it reaches a secure position. Install the new nut and bushings to the stabilizer bar links together with spacers while tightening them to 15 Nm (133 lb-in). After lowering the vehicle until it rests on the wheels and tires the mechanic should tighten the final bolt on the rearward lower arm outboard to 115 Nm (85 lb-ft).