How to Service the Coolant Reservoir on 2009 Ford Focus?

A suitable suction device should be used to siphon out coolant before starting the service of the expansion tank. Proceed by disconnecting the overflow tube and unscrewing the two retaining bolts of the coolant expansion tank until they reach 4 Nm torque (35 lb-in torque). The service of coolant expansion tanks starts with coolant siphoning through a suitable suction device followed by the reverse installation sequence. End your service of the coolant expansion tank by adding recommended coolant mixture through its opening while reaching the correct fluid level.

OEM 2009 Ford Focus Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2009 Ford Focus Expansion Tank
Part Number: 8S4Z-8A080-A
$33.63 MSRP: $45.76
You Save: $12.13 (27%)
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Base No.: 8A080
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.2 x 5.6 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-8A080-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2009 Ford Focus Coolant Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Coolant Reservoir Parts Questions & Experts Answers

Q: How to Service the Coolant Reservoir on 2009 Ford Focus?
A: A suitable suction device should be used to siphon out coolant before starting the service of the expansion tank. Proceed by disconnecting the overflow tube and unscrewing the two retaining bolts of the coolant expansion tank until they reach 4 Nm torque (35 lb-in torque). The service of coolant expansion tanks starts with coolant siphoning through a suitable suction device followed by the reverse installation sequence. End your service of the coolant expansion tank by adding recommended coolant mixture through its opening while reaching the correct fluid level.