How to Service the RH Wheel Seal on the 4F27E Transmission on 2009 Ford Focus?

Service of the RH halfshaft seal on 4F27E transmission begins with removing both front wheel and tire before taking off the RH halfshaft. You must remove the halfshaft prior to taking out the halfshaft seal. The Output Shaft Seal Installer and Handle should be used for installing the new halfshaft seal. Reinstall the RH halfshaft after the seal installation followed by reinstallation of the front wheel and tire. Proper transmission operation requires an inspection of the fluid level followed by necessary transmission fluid addition.

OEM 2009 Ford Focus Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Seal found

View related parts
2009 Ford Focus Spindle Seal, Rear Part Number: 9S4Z-1S175-B
Product Specifications
- Other Name: Seal; Wheel Seal, Rear
- Manufacturer Note: Water Seal
- Position: Rear
- Base No.: 1S175
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9S4Z-1S175-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2009 Ford Focus Wheel Seal

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Wheel Seal available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Wheel Seal as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Wheel Seal Parts Q&A

Q: How to Service the RH Wheel Seal on the 4F27E Transmission on 2009 Ford Focus?
A: Service of the RH halfshaft seal on 4F27E transmission begins with removing both front wheel and tire before taking off the RH halfshaft. You must remove the halfshaft prior to taking out the halfshaft seal. The Output Shaft Seal Installer and Handle should be used for installing the new halfshaft seal. Reinstall the RH halfshaft after the seal installation followed by reinstallation of the front wheel and tire. Proper transmission operation requires an inspection of the fluid level followed by necessary transmission fluid addition.