FordParts
My Garage
My Account
Cart
OEM 2009 Ford Fusion Fuel Pump
Gas Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Fuel Pumps found
2009 Ford Fusion Fuel Gauge Sending Unit, Passenger Side Part Number: 7E5Z-9275-C
$66.79 MSRP: $92.40You Save: $25.61 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger; Sending Unit; Fuel Level Sensor; Fuel Pump.; Fuel Pump Assembly; Fuel Sender Unit
- Position: Passenger Side
- Base No.: 9275
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.4 x 5.9 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-9275-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Fuel Pump Part Number: 8E5Z-9H307-T
$207.58 MSRP: $352.73You Save: $145.15 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Module Assembly; Strainers & Misc Prt; Fuel Pump Assembly
- Base No.: 9H307
- Item Weight: 3.50 Pounds
- Item Dimensions: 10.0 x 11.5 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E5Z-9H307-T
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Fuel Pump Part Number: 8E5Z-9H307-S
Product Specifications- Other Name: Sender And Pump Assembly; Fuel Pump Module; Strainers & Misc Parts; Electric Fuel Pump; Fuel Pump Assembly
- Base No.: 9H307
- Item Weight: 3.40 Pounds
- Item Dimensions: 10.4 x 10.7 x 12.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E5Z-9H307-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Fuel Pump Part Number: 7E5Z-9H307-U
Product Specifications- Other Name: Sender And Pump Assembly; Fuel Pump Module; Strainers & Misc Parts; Electric Fuel Pump; Fuel Pump Assembly
- Base No.: 9H307
- Item Weight: 4.10 Pounds
- Item Dimensions: 9.6 x 14.3 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-9H307-U
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Fuel Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Fuel Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Fuel Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Fusion Fuel Pump Parts Q&A
- Q: How to Safely Service and Repair a Fuel Pump Module on 2009 Ford Fusion?A: Safety measures must always be used during fuel level sensor and fuel pump module servicing because the system includes dangerous flammable mixtures. Start by draining fuel system pressure and separate the battery ground cable connection. Turn the fuel tank filler cap counterclockwise just one-fourth of a turn before setting it aside while being patient during removal to prevent fuel spray in case of system pressure. Insert the Fuel Draining Hose into the fuel tank filler pipe until the fitting touches the tank interior and attach the Fuel Storage Tanker to drain a one-eighth portion of the fuel tank to position the liquid beneath the fuel pump module mounting bracket. Start by removing the rear seat lower cushion and after that proceed to take out four screws from the front-wheel drive fuel pump module access cover or three screws from all-wheel drive vehicles. Separate the power connector of the fuel pump module and remove the quick connect coupling between the fuel tube and the module. Users should distribute absorbent pads underneath the floor pan to contain any spills before they remove the fuel pump module from the vehicle by following the procedure of correctly installing a new O-ring seal and lock ring. The Fuel Tank Sender Unit Wrench enables lock ring removal from the fuel pump module. In all-wheel drive vehicles users need to detach the fuel tube quick connect coupling of the fuel pump module by lifting it partially out of its position. When handling the fuel pump module be gentle because contact may break the arm on the float system while you drain leftover fuel into an appropriate storage container. The presence of damage on fuel pump module flange and fuel tank O-ring seal contact surfaces requires replacing either fuel pump module or fuel tank. Clean engine oil should be applied to the new O-ring seal before installation while following the removal steps backward until the alignment tab on the fuel pump module properly meets the fuel tank when tightening the lock ring.