How to Service the Seat Heater in the Cushion's Thermo-Electric Device (TED) on 2009 Ford Fusion?

The service process for seat cushion thermo-electric devices starts with removing the front seat followed by raising it to its full height to access the TED assembly after disabling Supplemental Restraint System (SRS). The inspections of the climate-controlled seat cushion manifold and foam pad must be completed while disconnected from the TED electrical connector to avoid temperature regulation problems. The installation of the TED assembly to the cushion frame requires the removal of three nuts which should be tightened to 6 Nm (53 lb-in) upon completion. Proper alignment of all components including cushion manifold and foam pad and TED assembly will stop airflow obstruction and both pad crush and material interference. The installation ends with reversing the removal steps.

OEM 2009 Ford Fusion Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Seat Heaters found

View related parts
2009 Ford Fusion Seat Back Heater, Front Passenger Side Part Number: 9E5Z-14D696-A
$43.37 MSRP: $60.00
You Save: $16.63 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Element; Seat Heater Pad, Front, Front Right; Seat Heater
- Position: Front Passenger Side
- Base No.: 14D696A
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-14D696-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Fusion Submodels:
- Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Ford Fusion Seat Back Heater, Front Driver Side Part Number: 9E5Z-14D696-B
Product Specifications
- Other Name: Element; Seat Heater Pad, Front Left; Seat Heater
- Position: Front Driver Side
- Base No.: 14D696A
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-14D696-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Fusion Seat Heater, Front Part Number: 6E5Z-14D696-AA
Product Specifications
- Other Name: Element Assembly - Heating; Seat Heater Pad, Front, Front Left, Front Right; Element
- Position: Front
- Base No.: 14D696B
- Item Weight: 1.00 Pounds
- Item Dimensions: 18.5 x 10.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6E5Z-14D696-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Fusion Submodels:
- Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS

2009 Ford Fusion Seat Heater

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Seat Heater available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Seat Heater as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Fusion Seat Heater Parts Q&A

Q: How to Service the Seat Heater in the Cushion's Thermo-Electric Device (TED) on 2009 Ford Fusion?
A: The service process for seat cushion thermo-electric devices starts with removing the front seat followed by raising it to its full height to access the TED assembly after disabling Supplemental Restraint System (SRS). The inspections of the climate-controlled seat cushion manifold and foam pad must be completed while disconnected from the TED electrical connector to avoid temperature regulation problems. The installation of the TED assembly to the cushion frame requires the removal of three nuts which should be tightened to 6 Nm (53 lb-in) upon completion. Proper alignment of all components including cushion manifold and foam pad and TED assembly will stop airflow obstruction and both pad crush and material interference. The installation ends with reversing the removal steps.