FordParts
My Garage
My Account
Cart
OEM 2009 Ford Fusion Spindle
Axle Spindle- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Spindles found
Product Specifications- Other Name: Stub Axle, Rear Right
- Position: Rear Passenger Side
- Base No.: 4A013
- Item Weight: 5.20 Pounds
- Item Dimensions: 4.4 x 4.3 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-4A013-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Spindle, Rear Driver Side Part Number: 3M8Z-4A013-L
Product Specifications- Other Name: Shaft; Stub Axle, Rear Left
- Position: Rear Driver Side
- Base No.: 4A013
- Item Weight: 5.60 Pounds
- Item Dimensions: 7.8 x 6.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-4A013-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Spindle; Suspension Knuckle Assembly, Rear Right
- Position: Rear Passenger Side
- Base No.: 4A013
- Item Weight: 15.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-4A013-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Spindle; Suspension Knuckle Assembly, Rear Left
- Position: Rear Driver Side
- Base No.: 4A013
- Item Weight: 15.20 Pounds
- Item Dimensions: 4.3 x 4.2 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-4A013-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Spindle
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Spindle available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Spindle as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Fusion Spindle Parts Q&A
- Q: How to service and repair the rear suspension wheel spindle on 2009 Ford Fusion?A: You should start repair and maintenance of the rear suspension wheel spindle by taking off the wheel bearing and wheel hub assembly. three brake disc shield bolts should be removed then the brake disc shield can be taken off while maintaining a torque value of 23 Nm (17 lb-ft) during reinstallation. The procedure requires you to eliminate the wheel spindle bolts followed by taking out the wheel spindle. New bolts should be used with the new wheel spindle and both bolts need tightening to 140 Nm (103 lb-ft). To end the installation process follow the procedure for returning everything to its original position. The correct retention of vital components depends on the use of new equivalent-quality parts with same part numbers and following specified torque values when reassembling.