How to service and repair the wheel spindle on Ford Fusion?

Begin wheel spindle service and repair operations by taking out the wheel bearing along with wheel hub assembly. You should remove the brake disc shield by taking out its three bolts first while tightening it back to 23 Nm (17 ft. lbs.) during reinstallation. The wheel spindle can be detached by removing the four spindle bolts before installation where their torque should be set at 140 Nm (103 ft. lbs.). The service will experience severe consequences if someone uses a wheel spindle part of lesser quality or with a different number than the original one that needs switching. Reinstall all critical suspension fasteners by using specified torque values so these components maintain their proper retention.

OEM Ford Fusion Spindle

Axle Spindle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Spindles found

View related parts
Ford Fusion Knuckle Assembly, Rear Passenger Side
Part Number: 7E5Z-4A013-R
Product Specifications
- Other Name: Spindle; Suspension Knuckle Assembly, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Knuckle Assembly, Rear Driver Side
Part Number: 7E5Z-4A013-L
Product Specifications
- Other Name: Spindle; Suspension Knuckle Assembly, Rear Left
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Spindle, Rear Passenger Side
Part Number: 3M8Z-4A013-R
Product Specifications
- Other Name: Stub Axle, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Spindle, Rear Driver Side
Part Number: 3M8Z-4A013-L
Product Specifications
- Other Name: Shaft; Stub Axle, Rear Left
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS

Ford Fusion Spindle

Welcome to our website where you can discover high-quality, genuine Ford Fusion Spindle. We offer an extensive inventory of OEM Ford Fusion Spindle at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Fusion Spindle Parts Questions & Experts Answers

Knuckle Assembly, Rear Passenger Side
7E5Z-4A013-R
Q: How to service and repair the wheel spindle on Ford Fusion?
A: Begin wheel spindle service and repair operations by taking out the Wheel Bearing along with Wheel Hub assembly. You should remove the brake disc shield by taking out its three bolts first while tightening it back to 23 Nm (17 ft. lbs.) during reinstallation. The wheel spindle can be detached by removing the four spindle bolts before installation where their torque should be set at 140 Nm (103 ft. lbs.). The service will experience severe consequences if someone uses a wheel spindle part of lesser quality or with a different number than the original one that needs switching. Reinstall all critical suspension fasteners by using specified torque values so these components maintain their proper retention.