FordParts
My Garage
My Account
Cart
OEM 2009 Ford Fusion Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Shock Absorbers found
2009 Ford Fusion Strut, Front Passenger Side Part Number: 7E5Z-18124-RH
$72.60 MSRP: $119.45You Save: $46.85 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Shock Absorber; Front Right Suspension Strut Assembly; Complete Strut Kit.; Shock Absorber; Shock
- Position: Front Passenger Side
- Replaces: 6H6Z-18124-AR, 6E5Z-18124-BR, AST-163, 7H6Z-18124-RL, AST-337, AST-164, 8H6Z-18124-A, 8E5Z-18124-R, AST-162, AST-279, AST-388, 6E5Z-18124-AR
- Base No.: 18124
- Item Weight: 5.80 Pounds
- Item Dimensions: 5.2 x 6.3 x 22.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-18124-RH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Strut, Front Driver Side Part Number: 7E5Z-18124-LH
$69.20 MSRP: $116.18You Save: $46.98 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Shock Absorber; Front Left Suspension Strut Assembly; Complete Strut Set.; Shock Absorber; Shock
- Position: Front Driver Side
- Replaces: 6H6Z-18124-AL, 6E5Z-18124-AL, 8E5Z-18124-L, AST-159, AST-160, AST-336, 8H6Z-18124-B, 6E5Z-18124-BL, AST-389, AST-161, AST-280, 7H6Z-18124-LH
- Base No.: 18124
- Item Weight: 5.90 Pounds
- Item Dimensions: 5.1 x 6.2 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-18124-LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Shock Absorber, Rear Part Number: 6E5Z-18125-BA
$58.34 MSRP: $96.00You Save: $37.66 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shock Absorber Assembly; Rear Suspension Shock Absorber Kit; Complete Strut Assembly.; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 7E5Z-18125-A, AE5Z-18125-C, ASH-431, ASH-440, 6E5Z-18125-AA, AST-281, AST-338, 8E5Z-18125-A, AST-177, ASH-421, AE5Z-18125-D, AE5Z-18125-B, ASH-432, AE5Z-18125-G, AST-283, AE5Z-18125-E, ASH-424, AE5Z-18125-A, 7H6Z-18125-C, AST-179, AE5Z-18125-F, AH6Z-18125-A, 6H6Z-18125-AA, ASH-420, 7H6Z-18125-D, ASH-423, ASH-422, AST-282, ASH-425, AH6Z-18125-B
- Base No.: 18125
- Item Weight: 7.30 Pounds
- Item Dimensions: 7.9 x 4.8 x 24.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6E5Z-18125-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Shock Absorber
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Fusion Shock Absorber Parts Q&A
- Q: How to remove and replace the shock absorber on Front Wheel Drive (FWD) and All-Wheel Drive (AWD) on 2009 Ford Fusion?A: The procedure for replacing shock absorbers starts with removing the upper arm of Front Wheel Drive (FWD) as well as All-Wheel Drive (AWD) MKZ and Fusion/Milan vehicles. Fasten the shock absorber compression by using tie straps until it maintains the compressed state. You must first take out the three shock absorber bracket bolts before extracting the shock absorber along with its upper bracket which you should discard with the bolts. Start by indexing the shock absorber along the bracket surface and then take out the shock absorber upper bolt, nut and bracket. The indexing mark on old shock absorbers needs to be transferred to new replacements before installation begins. You should carefully install the new shock absorber upper bolt and nut but do not make them fully tight yet. While tightening the upper shock absorber nut maintain the same angle between parts to avoid damage; position the index markings correctly until the shock absorber center line reaches 118 degrees from the bracket alignment tab. When installing the upper bolt on AWD vehicles tighten it to 90 Nm (66 lb-ft) while FWD vehicles require a torque of 103 Nm (76 lb-ft). Put the shock absorber together with the bracket before you install and tighten all three new bracket bolts to 40 Nm (30 lb-ft). Finally, reinstall the upper arm.