How to remove and replace the rear parking brake cable on 2009 Ford Ranger?

Begin procedures by releasing the parking brake control before you eliminate tension from the parking brake cable. Next, remove the brake shoes. You must disconnect the right-hand (RH) rear parking brake cable from the intermediate cable at its cable union before you can separate the RH rear parking brake cable from the left-hand (LH) rear parking brake cable at the equalizer by compressing the retainer. When installing the parking brake cable wire into the bracket bolt position it should be tightened to 17 Nm (150 lb-in). To install the LH rear parking brake cable the technician must disconnect the cable from the frame bracket before removing the equalizer and compressing the parking brake cable clip while removing the cable from the second frame bracket. Continuing with the RH rear parking brake cable separation involves removing it from the RH hydraulic brake tube clips and then unclipping it from the rear axle housing brake tube clip. After compressing the clips users can disconnect both parking brake cables from their backing plate positions. You should execute the installation by following the steps in reverse order from uninstallation.

OEM 2009 Ford Ranger Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
2009 Ford Ranger Rear Cable, Passenger Side
Part Number: 6L5Z-2A635-AAA
$50.34 MSRP: $84.36
You Save: $34.02 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 6L5Z-2A635-AA
- Base No.: 2A635
- Item Weight: 2.20 Pounds
- Item Dimensions: 0.1 x 14.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2A635-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Rear Cable, Driver Side
Part Number: 6L5Z-2A635-ABB
$41.33 MSRP: $65.64
You Save: $24.31 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 6L5Z-2A635-AB
- Base No.: 2A635
- Item Weight: 1.40 Pounds
- Item Dimensions: 18.5 x 14.4 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2A635-ABB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Front Cable
Part Number: 4L5Z-2853-AA
$36.07 MSRP: $57.27
You Save: $21.20 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable, Front; Brake Cable
- Position: Front
- Replaces: 3L5Z-2853-AA
- Base No.: 2853
- Item Weight: 1.20 Pounds
- Item Dimensions: 1.5 x 1.6 x 45.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2853-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Rear Cable, Driver Side
Part Number: 6L5Z-2A635-BBA
$28.15 MSRP: $53.09
You Save: $24.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
- Position: Driver Side
- Replaces: 6L5Z-2A635-BB
- Base No.: 2A635
- Item Weight: 2.10 Pounds
- Item Dimensions: 14.4 x 2.0 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2A635-BBA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Rear Cable, Passenger Side
Part Number: 6L5Z-2A635-BBB
$56.88 MSRP: $85.82
You Save: $28.94 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
- Position: Passenger Side
- Replaces: 6L5Z-2A635-BA
- Base No.: 2A635
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.1 x 8.2 x 22.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2A635-BBB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Parking Brake Cable Parts Questions & Experts Answers

Q: How to remove and replace the rear parking brake cable on 2009 Ford Ranger?
A: Begin procedures by releasing the parking brake control before you eliminate tension from the parking brake cable. Next, remove the brake shoes. You must disconnect the right-hand (RH) rear parking brake cable from the intermediate cable at its cable union before you can separate the RH rear parking brake cable from the left-hand (LH) rear parking brake cable at the equalizer by compressing the retainer. When installing the parking brake cable wire into the bracket bolt position it should be tightened to 17 Nm (150 lb-in). To install the LH rear parking brake cable the technician must disconnect the cable from the frame bracket before removing the equalizer and compressing the parking brake cable clip while removing the cable from the second frame bracket. Continuing with the RH rear parking brake cable separation involves removing it from the RH hydraulic brake tube clips and then unclipping it from the rear axle housing brake tube clip. After compressing the clips users can disconnect both parking brake cables from their backing plate positions. You should execute the installation by following the steps in reverse order from uninstallation.