How to service the ABS Sensor on a front, rear-wheel drive (RWD) on 2009 Ford Ranger?

Service of the ABS sensor on front and rear-wheel drive (RWD) vehicles begins with hoisting the vehicle in NEUTRAL position. First disconnect the electrical connector of the ABS sensor before unfastening the harness bolt and unclipping its retainers. To proceed with sensor servicing you should start by removing both the bolt and the ABS sensor from its position. Reinstallation should include narrowing-tightening the ABS sensor bolt to 12 Nm (106 lb-in) as well as the harness bolt. A light coating of specified grease needs application to the surface only after a thorough cleaning of the mounting area followed by plugging the sensor cavity. The installation process ends with the reverse steps of sensor removal.

OEM 2009 Ford Ranger ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Sensors found

View related parts
2009 Ford Ranger ABS Sensor, Front
Part Number: XL2Z-2C204-AB
$98.68 MSRP: $162.36
You Save: $63.68 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front, Front Left, Front Right; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Replaces: YL5Z-2C204-AB
- Base No.: 2C204
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.6 x 10.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XL2Z-2C204-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger ABS Sensor, Front Passenger Side
Part Number: 6L5Z-2C204-AA
$53.43 MSRP: $87.91
You Save: $34.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Replaces: 3L5Z-2C204-AA
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.4 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger ABS Sensor, Front
Part Number: 6L5Z-2C204-BA
$53.37 MSRP: $87.82
You Save: $34.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Replaces: 3L5Z-2C204-BA
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.4 x 19.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2C204-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger ABS Sensor Parts Questions & Experts Answers

Q: How to service the ABS Sensor on a front, rear-wheel drive (RWD) on 2009 Ford Ranger?
A: Service of the ABS sensor on front and rear-wheel drive (RWD) vehicles begins with hoisting the vehicle in NEUTRAL position. First disconnect the electrical connector of the ABS sensor before unfastening the harness bolt and unclipping its retainers. To proceed with sensor servicing you should start by removing both the bolt and the ABS sensor from its position. Reinstallation should include narrowing-tightening the ABS sensor bolt to 12 Nm (106 lb-in) as well as the harness bolt. A light coating of specified grease needs application to the surface only after a thorough cleaning of the mounting area followed by plugging the sensor cavity. The installation process ends with the reverse steps of sensor removal.