FordParts
My Garage
My Account
Cart
OEM 2009 Ford Ranger Power Window Motor
Window Lift Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Power Window Motors found
Product Specifications- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Left; Window Regulator; Motor; Power Window Motor
- Position: Front Driver Side
- Replaces: F57Z-1023395-AA, 3L5Z-1523395-BA
- Base No.: 23395
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.1 x 3.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L5Z-7823395-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Right; Window Regulator; Motor; Power Window Motor
- Position: Front Passenger Side
- Replaces: 3L5Z-1523394-BA, F57Z-1023394-AA, WLM-152
- Base No.: 23394
- Item Weight: 2.30 Pounds
- Item Dimensions: 10.3 x 3.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L5Z-7823394-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Power Window Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Power Window Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Power Window Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Ranger Power Window Motor Parts Q&A
- Q: How to service the front door Window Regulator and Power Window Motor on 2009 Ford Ranger?A: You need to begin repair of front door window motor and regulator by removing door trim panel and watershield followed by supporting the window glass. Detach the electrical connector when power window motor operation is permitted. The next step requires removal of top and bottom center door glass run retainer nuts before tightening them to 9 Nm (80 lb-in) for future installation. The rivets can be disassembled with a drift punch for steel center extraction and a drill bit with 6.35 mm (1/4 in) diameter for rivet removal. The power window regulator contains 4 rivets but the manual shows 3. Move on to the window regulator extraction after you take out its rivets. Before removing the window regulator motor, check that the window is fully elevated or use some object to stop the regulator arm from moving since an uncontrolled counterbalance spring release could lead to severe injuries. It is possible to remove the window glass motor after detaching its bolts while setting each bolt torque to 8 Nm (71 lb-in) upon reinstalling. Install the new rivets through a Heavy Duty Riveter while performing the exact opposite of removal steps.