How to Service the A/C Hose from Compressor to Condenser on 2009 Ford Taurus?

Service of the compressor to condenser discharge line requires a refrigerant recovery process at the beginning of work. After bolt removal from the rear A/C compressor you must tighten it to 25 Nm (18 lb-ft) at its final installation. Disconnection of the A/C compressor discharge fitting becomes possible through fitting nut removal and disposal of O-ring seal and gasket seal before tightening the fitting nut to 15 Nm (133 lb-in). Disconnect the A/C pressure transducer electrical connector before removing the condenser inlet fitting nut and disconnecting the fitting which requires discarding both O-ring seal and gasket seal parts while tightening the fitting nut to 15 Nm (133 lb-in) during reinstallation. You should remove the compressor-to-condenser discharge line at this stage. The installation requires reversing all removal steps while inserting new gasket seals and O-ring seals and pouring the correct amount of clean PAG oil. The final task in the process involves evacuation and leak testing followed by refrigerant system charging.

OEM 2009 Ford Taurus A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Hoses found

View related parts
2009 Ford Taurus Suction Hose Part Number: 9G1Z-19867-A
$72.30 MSRP: $100.02
You Save: $27.72 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; A/C Hoses; Suction Tube; Suction Line
- Base No.: 19867
- Item Weight: 1.20 Pounds
- Item Dimensions: 4.5 x 11.3 x 39.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9G1Z-19867-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus Suction Hose Part Number: 8G1Z-19835-D
$48.66 MSRP: $67.31
You Save: $18.65 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; A/C Hoses; A/C Tube; Evaporator Tube
- Replaces: 8G1Z-19835-B, 8G1Z-19835-C
- Base No.: 19835B
- Item Weight: 2.80 Pounds
- Item Dimensions: 8.1 x 11.3 x 25.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-19835-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus Discharge Hose Part Number: 9G1Z-19972-A
$77.35 MSRP: $127.27
You Save: $49.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; A/C Hoses; Pressure Tube
- Manufacturer Note: Compressor to condenser
- Base No.: 19972
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.1 x 9.3 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9G1Z-19972-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus Liquid Line Part Number: 8G1Z-19835-A
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Evaporator Tube
- Base No.: 19835A
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 8.4 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-19835-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus Discharge Hose Part Number: 8G1Z-19D734-A
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; Pressure Tube
- Base No.: 19D734
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.1 x 8.2 x 27.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-19D734-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus Suction Hose Part Number: 8G1Z-19867-A
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Tube; Suction Line
- Base No.: 19867
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.2 x 12.7 x 38.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-19867-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS

2009 Ford Taurus A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Taurus A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Taurus A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Taurus A/C Hose Parts Q&A

Q: How to Service the A/C Hose from Compressor to Condenser on 2009 Ford Taurus?
A: Service of the compressor to condenser discharge line requires a refrigerant recovery process at the beginning of work. After bolt removal from the rear A/C compressor you must tighten it to 25 Nm (18 lb-ft) at its final installation. Disconnection of the A/C compressor discharge fitting becomes possible through fitting nut removal and disposal of O-ring seal and gasket seal before tightening the fitting nut to 15 Nm (133 lb-in). Disconnect the A/C pressure transducer electrical connector before removing the condenser inlet fitting nut and disconnecting the fitting which requires discarding both O-ring seal and gasket seal parts while tightening the fitting nut to 15 Nm (133 lb-in) during reinstallation. You should remove the compressor-to-condenser discharge line at this stage. The installation requires reversing all removal steps while inserting new gasket seals and O-ring seals and pouring the correct amount of clean PAG oil. The final task in the process involves evacuation and leak testing followed by refrigerant system charging.