My Garage
Cart
Make sure this part fits

Ford 8G1Z-19835-A
Liquid Line

2008-2009 Ford 8G1Z19835A

Customer Questions & Expert Answers (10)
Ford 8G1Z-19835-A Liquid Line
Ford 8G1Z-19835-A Liquid Line
  • Part Description
    Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
  • Base No.
    19835A
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.19835A
    Manufacturer Part Number8G1Z-19835-A
    Part DescriptionTube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
    Other NamesEvaporator Tube
    Item Dimensions6.3 x 8.4 x 17.9 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU8G1Z-19835-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009 Ford FlexLimited, SE, SEL6 Cyl 3.5 L GAS
    2008-2009 Ford TaurusLimited, SE, SEL6 Cyl 3.5 L GAS
    2008-2009 Ford Taurus XEddie Bauer, Limited, SEL6 Cyl 3.5 L GAS
    2009 Lincoln MKSBase6 Cyl 3.7 L GAS
    2008-2009 Mercury SableBase, Premier6 Cyl 3.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will this 8G1Z-19835-A work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 8G1Z-19835-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What is the next step after disconnecting the A/C compressor discharge fitting for the 2009 Ford Flex? Posted by Customer
    A:
    Disconnect the A/C pressure transducer electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the front auxiliary evaporator inlet line fitting nut for the 2009 Ford Flex? Posted by Customer
    A:
    Disconnect it, discard the O-ring seal and gasket seal, and tighten the new fitting to 15 Nm (133 lb-in) upon installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done to the refrigerant system before charging for the 2008 Ford Taurus X? Posted by Customer
    A:
    Lubricate the refrigerant system with the correct amount of clean PAG oil, then evacuate, leak test, and charge the refrigerant system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    If only one auxiliary evaporator line needs removal, what should be done for the 2009 Ford Taurus X? Posted by Customer
    A:
    Detach only that line from the brackets.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the final step in the removal process for the 2008 Ford Taurus X? Posted by Customer
    A:
    Remove the TXV manifold and tube assembly, reverse the removal procedure for installation, ensuring to use new gasket seals and O-ring seals.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the process for the front auxiliary evaporator outlet line for the 2009 Ford Taurus? Posted by Customer
    A:
    Repeat the same process as for the front auxiliary evaporator inlet line.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after recovering the refrigerant for the 2009 Lincoln MKS? Posted by Customer
    A:
    Remove the four cross vehicle beam nuts and take off the beam, ensuring to tighten it to 30 Nm (22 lb-ft) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step in servicing and repairing the auxiliary evaporator outlet and inlet lines for the 2008 Mercury Sable? Posted by Customer
    A:
    Begin by cutting the underbody auxiliary line(s) into sections for easier removal, ensuring the correct identification of the line(s) to prevent damage and coolant loss.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the final step in the removal process for the 2009 Mercury Sable? Posted by Customer
    A:
    Remove the TXV manifold and tube assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 8G1Z-19835-A, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 8G1Z-19835-A Liquid Line. It is sometimes referred to as Ford A/C Hose. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 8G1Z19835A Liquid Line. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery