How to remove and replace the front bumper cover on 2009 Lincoln MKS?

A hoist must position the vehicle in neutral to allow effective front bumper cover replacement. The first step involves removing 2 front bumper cover scrivets while tightening their installation to 6 Nm (53 lb-in) and discarding 4 front bumper cover bolts with the same torque value. Your first step should be to remove the 6 front bumper cover wheel house screws which exist in sets of three per side and the 2 screws that reside in the front upper wheel well with one screw present on each side. Cuts off the lower inside LH bumper cover fog lamp electrical connector as well as removes the speed control sensor electrical connector when present. Before removing the front bumper cover take out seven lower scrivets from the air deflector along with notating how the upper rear section must pop outward from the fender to separate it out. Check if the bumper cover mounting reinforcements have damage and replace them if needed. Reverse the removal steps when performing installation of this component.

OEM 2009 Lincoln MKS Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Bumpers found

View related parts
2009 Lincoln MKS Impact Bar, Front Part Number: DG1Z-17757-A
$350.48 MSRP: $411.72
You Save: $61.24 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: DG1Z-17757-B, 8A8Z-17757-A, AA8Z-17757-A, DG1Z-17757-C
- Base No.: 17757
- Item Weight: 13.80 Pounds
- Item Dimensions: 55.3 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG1Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Bumper Cover, Front Part Number: 8A5Z-17D957-AAPTM
$202.93 MSRP: $295.38
You Save: $92.45 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Prime, Paint To Match - Reference TSB 03-10-1
- Position: Front
- Base No.: 17D957
- Item Weight: 20.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-17D957-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Impact Bar, Rear Part Number: AG1Z-17906-A
$249.86 MSRP: $366.90
You Save: $117.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Manufacturer Note: To Be Used For Servicing All Prior Models Along With Isolator AA5Z-17E855-A
- Position: Rear
- Replaces: 8A5Z-17906-A
- Base No.: 17906
- Item Weight: 24.40 Pounds
- Item Dimensions: 58.1 x 12.5 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AG1Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base | 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Bumper Cover Part Number: 8A5Z-17D957-GAPTM
$859.30
ADD TO CART
Product Specifications
- Other Name: Cover
- Manufacturer Note: Prime, Paint To Match - Reference TSB 03-10-1
- Base No.: 17D957
- Item Weight: 99.00 Pounds
- Item Dimensions: 86.5 x 45.5 x 27.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-17D957-GAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Bumper Cover Part Number: 8A5Z-17K835-GAPTM
$513.51 MSRP: $754.05
You Save: $240.54 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover
- Base No.: 17K835
- Item Weight: 14.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-17K835-GAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2009 Lincoln MKS Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKS Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKS Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKS Bumper Parts Q&A

Q: How to remove and replace the front bumper cover on 2009 Lincoln MKS?
A: A hoist must position the vehicle in neutral to allow effective front bumper cover replacement. The first step involves removing 2 front bumper cover scrivets while tightening their installation to 6 Nm (53 lb-in) and discarding 4 front bumper cover bolts with the same torque value. Your first step should be to remove the 6 front bumper cover wheel house screws which exist in sets of three per side and the 2 screws that reside in the front upper wheel well with one screw present on each side. Cuts off the lower inside LH bumper cover fog lamp electrical connector as well as removes the speed control sensor electrical connector when present. Before removing the front bumper cover take out seven lower scrivets from the air deflector along with notating how the upper rear section must pop outward from the fender to separate it out. Check if the bumper cover mounting reinforcements have damage and replace them if needed. Reverse the removal steps when performing installation of this component.