How to Remove and Replace the Rear Door Latch Assembly on 2009 Lincoln MKS?

The first step to replace the rear door latch requires users to ensure window glass reaches its highest position while disconnecting the window regulator motor connector to stop unintended window operation that poses injury risks. Start by taking out the rear door trim panel then set the watershield to the side. For this procedure disconnect the electrical connector that operates the window regulator and remove the door handle which functions from outside. The procedure demands cutting off power to the rear door latch actuator first while extracting the door lock rod extension from the rod. The installation process involves moving the door lock rod together with its grommet from out of the door panel. Then add the inside door handle cable and its grommet. The exterior door handle reinforcement bolt requires loosening before tightening it to 7 Nm (62 lb-in) in the reassembly stage. Next reinstall the exterior front door handle reinforcement at the vehicle front before sinking it into the door opening. Attendance should focus on removing three rear door latch bolts while you should tighten them to 12 Nm (106 lb-in) before reinstalling. Service technicians should first remove the complete latch assembly from the door before opening the clip to take off the exterior rear door handle actuating rod. The rear door latch removal from the carrier takes place by unclipping it first before extraction. For installment do the reverse procedures.

OEM 2009 Lincoln MKS Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Latch Assemblys found

View related parts
2009 Lincoln MKS Lock Actuator, Front Passenger Side Part Number: DG1Z-5421812-A
$138.72 MSRP: $201.92
You Save: $63.20 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly, Front Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Door Latch Assembly
- Position: Front Passenger Side
- Replaces: 8A5Z-5421812-E, BB5Z-7821812-A
- Base No.: <21812
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.1 x 4.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG1Z-5421812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Lock Actuator, Driver Side Part Number: DG1Z-5421813-C
$157.28 MSRP: $228.93
You Save: $71.65 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock
- Position: Driver Side
- Replaces: 8A5Z-5421813-F, CG1Z-5421813-C
- Base No.: <21812
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.2 x 4.5 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG1Z-5421813-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Lock Actuator, Rear Passenger Side Part Number: DG1Z-5426412-A
$141.35 MSRP: $205.75
You Save: $64.40 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly, Rear Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock; Door Latch Assembly
- Position: Rear Passenger Side
- Replaces: CG1Z-5426412-B, 8A5Z-5426412-A, BB5Z-7826412-A
- Base No.: <26412
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.2 x 4.4 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG1Z-5426412-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Release Rod Retainer Clip, Front Part Number: XR8Z-65219A24-AA
$12.15 MSRP: $17.23
You Save: $5.08 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clip; Door Handle Rod Guide, Front; Rear Door Handle Link Clip; Rear Door Lock Rod Clip; Front Door Latch Clip.; Handle Rod Retainer Clip; Latch Assembly Clip; Remote Rod Retainer; Lock Rod Retainer.
- Position: Front
- Base No.: 219A24
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR8Z-65219A24-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Lock Actuator, Rear Driver Side Part Number: DG1Z-5426413-A
$132.01 MSRP: $203.72
You Save: $71.71 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly, Rear Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock; Door Latch Assembly
- Position: Rear Driver Side
- Replaces: CG1Z-5426413-B, BB5Z-7826413-A, 8A5Z-5426413-A
- Base No.: <26412
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.2 x 4.5 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG1Z-5426413-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2009 Lincoln MKS Door Latch Assembly

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKS Door Latch Assembly available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKS Door Latch Assembly as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKS Door Latch Assembly Parts Q&A

Q: How to Remove and Replace the Rear Door Latch Assembly on 2009 Lincoln MKS?
A: The first step to replace the rear door latch requires users to ensure window glass reaches its highest position while disconnecting the window regulator motor connector to stop unintended window operation that poses injury risks. Start by taking out the rear door trim panel then set the watershield to the side. For this procedure disconnect the electrical connector that operates the window regulator and remove the door handle which functions from outside. The procedure demands cutting off power to the rear door latch actuator first while extracting the door lock rod extension from the rod. The installation process involves moving the door lock rod together with its grommet from out of the door panel. Then add the inside door handle cable and its grommet. The exterior door handle reinforcement bolt requires loosening before tightening it to 7 Nm (62 lb-in) in the reassembly stage. Next reinstall the exterior front door handle reinforcement at the vehicle front before sinking it into the door opening. Attendance should focus on removing three rear door latch bolts while you should tighten them to 12 Nm (106 lb-in) before reinstalling. Service technicians should first remove the complete latch assembly from the door before opening the clip to take off the exterior rear door handle actuating rod. The rear door latch removal from the carrier takes place by unclipping it first before extraction. For installment do the reverse procedures.