How to remove and install the rear seat cushion assembly on 2009 Lincoln MKS?

Begin by opening the assembly front to reach the two floor latch relays which must be pushed toward the driver side while you lift it up to disengage the front. Push the cushion assembly to its maximum extent before using rear outboard ends to raise it then pull it out in order to remove retainer hooks. You should disconnect the heated seat electric wires by pulling the cushion assembly forward and then fully extracting the assembly. After reversing these steps for installation it is essential to check that the safety belt buckles stay easily accessible for occupants during and after the installation process.

OEM 2009 Lincoln MKS Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Seat Cushions found

View related parts
2009 Lincoln MKS Seat Back Pad, Driver Side Part Number: 8A5Z-5464811-B
$28.49 MSRP: $39.41
You Save: $10.92 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back
- Position: Driver Side
- Base No.: <64810
- Item Weight: 4.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-5464811-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Seat Cushion Pad, Rear Part Number: 8A5Z-54600A88-B
$401.85 MSRP: $590.08
You Save: $188.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear
- Base No.: <600A88
- Item Weight: 14.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-54600A88-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Seat Back Pad, Passenger Side Part Number: 8A5Z-5464810-B
Product Specifications
- Other Name: Pad
- Position: Passenger Side
- Base No.: <64810
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-5464810-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Seat Cushion Pad, Driver Side Part Number: 8A5Z-54632A23-B
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Position: Driver Side
- Base No.: <632A22
- Item Weight: 4.90 Pounds
- Item Dimensions: 22.4 x 22.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-54632A23-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Lincoln MKS Seat Cushion Pad, Passenger Side Part Number: 8A5Z-54632A22-B
Product Specifications
- Other Name: Pad; Seat Cushion
- Position: Passenger Side
- Base No.: <632A22
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-54632A22-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2009 Lincoln MKS Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKS Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKS Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKS Seat Cushion Parts Q&A

Q: How to remove and install the rear seat cushion assembly on 2009 Lincoln MKS?
A: Begin by opening the assembly front to reach the two floor latch relays which must be pushed toward the driver side while you lift it up to disengage the front. Push the cushion assembly to its maximum extent before using rear outboard ends to raise it then pull it out in order to remove retainer hooks. You should disconnect the heated seat electric wires by pulling the cushion assembly forward and then fully extracting the assembly. After reversing these steps for installation it is essential to check that the safety belt buckles stay easily accessible for occupants during and after the installation process.