How to remove the oil pan from the engine on 2009 Lincoln MKX?

In order to take out the oil pan, disassemble the engine, wipe down surfaces, and take out bolts, sensors, and harnesses. Take off drain coolant, valve covers and crankshaft components. Loosen up the engine mount bracket and the front cover followed by the removal of the oil pan. Clean surfaces, and make sure that they are properly sealed before reassembling.

OEM 2009 Lincoln MKX Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pan found

View related parts
2009 Lincoln MKX Oil Pan Part Number: 7T4Z-6675-A
$130.68 MSRP: $201.67
You Save: $70.99 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Base No.: 6675
- Item Weight: 15.00 Pounds
- Item Dimensions: 7.7 x 21.3 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS

2009 Lincoln MKX Oil Pan

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKX Oil Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKX Oil Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKX Oil Pan Parts Q&A

Q: How to remove the oil pan from the engine on 2009 Lincoln MKX?
A: In order to take out the oil pan, disassemble the engine, wipe down surfaces, and take out bolts, sensors, and harnesses. Take off drain coolant, valve covers and crankshaft components. Loosen up the engine mount bracket and the front cover followed by the removal of the oil pan. Clean surfaces, and make sure that they are properly sealed before reassembling.