My Garage
Cart
Make sure this part fits

Ford 7T4Z-6675-A
Oil Pan

2007-2012 Ford 7T4Z6675A

Customer Questions & Expert Answers (8)
Ford 7T4Z-6675-A Oil Pan
Ford 7T4Z-6675-A Oil Pan
  • Part Description
    Pan Assembly - Engine Oil; Engine Oil Pan
  • Base No.
    6675
  • Manufacturer
    Ford
Make sure this part fits
$130.68 MSRP: $201.67
You Save: $70.99 (36%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2010 Ford EdgeLimited, SE, SEL, SEL Plus, Sport6 Cyl 3.5 L GAS
    2009-2012 Ford FlexLimited, SE, SEL, Titanium6 Cyl 3.5 L GAS
    2010-2012 Ford FusionSport6 Cyl 3.5 L GAS
    2008-2012 Ford TaurusLimited, SE, SEL6 Cyl 3.5 L GAS
    2008-2009 Ford Taurus XEddie Bauer, Limited, SEL6 Cyl 3.5 L GAS
    2009-2012 Lincoln MKSBase6 Cyl 3.7 L GAS
    2010-2012 Lincoln MKTBase6 Cyl 3.7 L GAS
    2007-2010 Lincoln MKXBase6 Cyl 3.5 L GAS
    2007-2012 Lincoln MKZBase6 Cyl 3.5 L GAS
    2008-2009 Mercury SableBase, Premier6 Cyl 3.5 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you verify if 7T4Z-6675-A is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 7T4Z-6675-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What steps are involved in removing the upper intake manifold for the 2009 Ford Edge? Posted by Customer
    A:
    Remove the upper intake manifold support bracket bolt and the 6 bolts securing the upper intake manifold, discarding the gaskets.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pan
    Q:
    What is the procedure for installing the A/C compressor mounting stud and nut for the 2009 Ford Flex? Posted by Customer
    A:
    Tighten the stud to 9 Nm (80 lb-in) and the nut to 25 Nm (18 lb-ft).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pan
    Q:
    How do you clean the sealing surfaces of the cylinder block for the 2009 Ford Taurus X? Posted by Customer
    A:
    Remove large deposits of silicone or gasket material, apply silicone gasket remover, and use metal surface prep to eliminate traces of oil or coolant, ensuring the 2 locating dowel pins are seated correctly in the cylinder block.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pan
    Q:
    How should the engine front cover sealing surfaces be prepared for the 2009 Ford Taurus? Posted by Customer
    A:
    Apply a 3.0 mm bead of Motorcraft High Performance Engine RTV Silicone to the engine front cover sealing surfaces and a 5.5 mm bead to the oil pan-to-cylinder block and cylinder head-to-cylinder block joint areas.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pan
    Q:
    What are the torque specifications for the oil pan bolts for the 2009 Lincoln MKS? Posted by Customer
    A:
    Tighten the specified bolts to 3 Nm (27 lb-in), large bolts (1-14) to 24 Nm (18 lb-ft), and small bolts (15 and 16) to 10 Nm (89 lb-in).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pan
    Q:
    What steps are involved in removing the upper intake manifold for the 2009 Lincoln MKX? Posted by Customer
    A:
    Remove the upper intake manifold support bracket bolt and the 6 bolts securing the upper intake manifold, discarding the gaskets.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pan
    Q:
    What is the final step before installing the engine for the 2009 Mercury Sable? Posted by Customer
    A:
    Remove the engine from the stand using a heavy-duty floor crane and spreader bar, then install the crankshaft sensor ring and flexplate, tightening the flexplate bolts to 80 Nm (59 lb-ft).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pan
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Oil Pan 7T4Z-6675-A Designed for Proper Fit and Performance

The Ford part 7T4Z-6675-A Oil Pan as a genuine Ford Oil Pan component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 7T4Z-6675-A Oil Pan is used with Ford Fusion, Edge, Taurus vehicles and Mercury Sable models and Lincoln MKZ, MKX, MKS models. The original Ford part will bear the manufacturer part number: 7T4Z-6675-A and where it is made at Ford. It has the code: 6675.
This component has dimensions of 7.7 x 21.3 x 16.6 inches and its weight is approximately 15.00 Pounds. The part 7T4Z6675A is available in New condition while meeting the standards of the product rating. The Pan Assembly - Engine Oil; Engine Oil Pan belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 7T4Z-6675-A can be vital. The inventory reference for this item is SKU: 7T4Z-6675-A. Additional manufacturer-provided details include: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.