How to service and repair the power steering pump on 2009 Lincoln MKX?

Off-Road Techniques Raise vehicle, drain reservoir, remove RH splash shield, remove belt with Stretchy Belt Remover as crank is turned. On AWD, unbolt and disassemble driveshaft; support and lower rear subframe. Turn off disconnect lines/PSP switch, disconnect pump. Use new seals to install pump, attach subframe / driveshaft, install belt with tool, shield, and refill.

OEM 2009 Lincoln MKX Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pump found

View related parts
2009 Lincoln MKX Power Steering Pump Part Number: 9T4Z-3A696-A
$197.83 MSRP: $326.40
You Save: $128.57 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Power Steering
- Manufacturer Note: With Pulley
- Replaces: 7T4Z-3A696-A
- Base No.: 3A674
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.5 x 8.1 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-3A696-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS

2009 Lincoln MKX Power Steering Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKX Power Steering Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKX Power Steering Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKX Power Steering Pump Parts Q&A

Q: How to service and repair the power steering pump on 2009 Lincoln MKX?
A: Off-Road Techniques Raise vehicle, drain reservoir, remove RH splash shield, remove belt with Stretchy Belt Remover as crank is turned. On AWD, unbolt and disassemble driveshaft; support and lower rear subframe. Turn off disconnect lines/PSP switch, disconnect pump. Use new seals to install pump, attach subframe / driveshaft, install belt with tool, shield, and refill.