FordParts
My Garage
My Account
Cart
OEM 2009 Lincoln MKZ Motor And Transmission Mount
Motor and Trans Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Motor And Transmission Mounts found
2009 Lincoln MKZ Transmission Mount, Upper Part Number: 8H6Z-6038-A
$83.62 MSRP: $121.72You Save: $38.10 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Insulator Assembly; Automatic Transmission Mount, Upper; Transfer Case Mount
- Position: Upper
- Replaces: 7H6Z-6038-AB
- Base No.: 6038
- Item Weight: 7.80 Pounds
- Item Dimensions: 9.2 x 8.1 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8H6Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln MKZ Transmission Mount, Lower Part Number: 8H6Z-6068-A
$55.70 MSRP: $81.08You Save: $25.38 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Housing; Engine Support Rod, Lower; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Torque Arm; Torque Strut; Strut
- Position: Lower
- Replaces: 7H6Z-6068-CA
- Base No.: 6068
- Item Weight: 1.80 Pounds
- Item Dimensions: 8.2 x 4.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8H6Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln MKZ Front Mount Part Number: 7H6Z-6038-A
$167.09 MSRP: $206.67You Save: $39.58 (20%)Product Specifications- Other Name: Bracket; Engine Mount; Engine Mount Bracket; Motor Mount; Mount
- Replaces: 7H6Z-6038-AA
- Base No.: 6038A
- Item Weight: 12.60 Pounds
- Item Dimensions: 9.0 x 12.5 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7H6Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount Bracket, Upper; Transfer Case Mount; Transmission Mount
- Position: Upper
- Replaces: 7H6Z-6031-AA
- Base No.: 6031
- Item Weight: 3.80 Pounds
- Item Dimensions: 10.4 x 10.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9H6Z-6031-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln MKZ Motor And Transmission Mount
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKZ Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKZ Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln MKZ Motor And Transmission Mount Parts Q&A
- Q: How to service and repair the rear Motor And Transmission Mount on 2009 Lincoln MKZ?A: Start the transaxle rear support insulator service and repair operation by securing the vehicle on a hoist system when the transmission is set to neutral position. Reinstall the splash shield after removing both its bolts and the shield while securing the bolts at 47 Nm (35 lb-ft). Follow by uninstalling both lower transaxle rear support insulator bolts and reinstalling them with 63 Nm (46 lb-ft) torque. Remove the battery along with the battery tray through the positive cable retainer disconnect before taking off the battery tray bolts. Reinstall the bolts with a torque setting of 80 lb-in. The Power Distribution Box (PDB) can be set aside through disconnection of the PDB bolts followed by the lower nut and a subsequent upward pull that releases the pushpin and disconnects the two electrical connectors. A suitable floor jack should support the transaxle while you uninstall the two transaxle rear support insulator-to-frame bolts and the two nuts and the transaxle rear support insulator-to-transaxle bolt. Reinstall each mount stud with new components which should extend fully into the case before tightening them to 63 Nm (46 lb-ft). Begin by taking off the clutch hydraulic tube spring clip then apply downward pressure to the clutch tube so it unlocks from its bracket before proceeding to eliminate the clutch hydraulic tube plastic retainer and transaxle mount. The process ends by performing the opposite steps of removal.
Related 2009 Lincoln MKZ Parts
2009 Lincoln MKZ Cam Gear
2009 Lincoln MKZ Crankshaft Gear
2009 Lincoln MKZ Crankshaft Seal
2009 Lincoln MKZ Cylinder Head
2009 Lincoln MKZ Dipstick
2009 Lincoln MKZ Engine Mount
2009 Lincoln MKZ Oil Filler Cap
2009 Lincoln MKZ Timing Chain
2009 Lincoln MKZ Timing Chain Tensioner
2009 Lincoln MKZ Valve Cover Gasket
2009 Lincoln MKZ Valve Stem Seal
2009 Lincoln MKZ Variable Timing Sprocket