How to service the thermostat housing on 2009 Lincoln Navigator?

To put in the service of the thermostat housing, drain the cooling system, loosen the upper radiator hose, and loosen the bolts connecting the housing, disposing the O-ring. Wipe the surfaces, change the thermostat and O-ring, tighten the bolts by hand, and then tighten to 10 Nm (89 lb-in). Undo the process of removal to complete.

OEM 2009 Lincoln Navigator Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat Housing found

View related parts
2009 Lincoln Navigator Thermostat Housing, Upper Part Number: 9L3Z-8592-A
$25.19 MSRP: $36.67
You Save: $11.48 (32%)
ADD TO CART
Product Specifications
- Other Name: Connection Water Outlet; Engine Coolant Thermostat Housing & Cover.; Water Outlet; Connection - Water Outlet
- Position: Upper
- Base No.: 8592
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.4 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-8592-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
- Base, L | 8 Cyl 5.4 L FLEX

2009 Lincoln Navigator Thermostat Housing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Navigator Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Navigator Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Navigator Thermostat Housing Parts Q&A

Q: How to service the thermostat housing on 2009 Lincoln Navigator?
A: To put in the service of the thermostat housing, drain the cooling system, loosen the upper radiator hose, and loosen the bolts connecting the housing, disposing the O-ring. Wipe the surfaces, change the thermostat and O-ring, tighten the bolts by hand, and then tighten to 10 Nm (89 lb-in). Undo the process of removal to complete.