OEM 2009 Lincoln Navigator Transmission Pan

2009 Lincoln Navigator Transmission Pan Parts Questions & Experts Answers

• Q: How to service and repair the Transmission Pan on a 6R80 transmission on 2009 Lincoln Navigator?

  A: A technician should start fluid pan servicing on 6R80 transmissions after positioning the vehicle properly on a hoist in NEUTRAL gear. You should take off the transmission fluid fill plug from the level indicator assembly found near the passenger front of the transmission case because this releases vacuum which makes it easier to remove the fluid pan. Start by removing the transmission fluid pan and leave it to drain fully before discarding the transmission fluid filter together with its accompanying gasket. A thorough examination and cleaning process must be performed on the transmission fluid pan together with its magnet. The repair of transmission tubing contamination requires installation of fresh transmission fluid filter and seal assembly but excessive contamination does not prevent reuse of the filter. Check the transmission case for the filter seal before removing it carefully unless any scratches form on the case surface. Before adding a new transmission fluid filter you must lubricate its seal with automatic transmission fluid. The magnetic element must return to its fluid pan then you should replace the damaged gasket but you can use the existing one if the gasket remains functional. Before installation of the transmission fluid pan use torque of 12 Nm (106 lb-in) to tighten bolts while keeping a crisscross pattern. Transmission fluid filling procedures should take place following installation together with necessary fluid checking operations.