How to remove and replace the front brake disc on 2009 Lincoln Town Car?

One must begin brake rotor replacement by first removing the tire along with the wheel. The brake caliper along with brake pads and anchor plate assembly must never dangle from the brake hose since such suspension could result in damage to the components. To remove the brake caliper along with its anchor plate and pads, first extract the two plate mounting bolt screws then set the complete assembly aside with the removal of the bolts. Secure the supported assembly by mechanic's wire. New anchor plate bolts must be employed for installation before tightening them to 160 Nm (118 lb-ft). Rust penetrants should be applied to the joint between the brake disc and wheel hub when the brake disc is hard to separate. Begin by removing the brake disc together with its retention ring which can be discarded. Reverse the removal procedure for installation while using a new retention ring. Using specified brake parts cleaner the brake disc along with wheel and wheel hub must be cleaned from any rust or foreign materials. Before repeating the test apply anti-seize lubricant to the hub mounting surface to stop corrosion then check proper brake functioning requires multiple brakes applications.

OEM 2009 Lincoln Town Car Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Discs found

View related parts
2009 Lincoln Town Car Rotor
Part Number: 3U2Z-1V125-AB
$71.81 MSRP: $108.32
You Save: $36.51 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Replaces: 3W1Z-1V125-AA, BRR-111
- Base No.: 1125
- Item Weight: 22.70 Pounds
- Item Dimensions: 2.8 x 13.6 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U2Z-1V125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Lincoln Town Car Rotor
Part Number: 4U2Z-1V125-K
$35.75 MSRP: $49.46
You Save: $13.71 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Replaces: 4U2Z-1V125-AA, BRR-118, BRRF-187
- Item Weight: 21.70 Pounds
- Item Dimensions: 3.2 x 14.7 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-1V125-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Lincoln Town Car Rotor
Part Number: 3U2Z-2V026-DB
$71.81 MSRP: $108.32
You Save: $36.51 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Replaced by: 3U2Z-1V125-E
- Item Weight: 16.60 Pounds
- Item Dimensions: 3.4 x 12.9 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U2Z-2V026-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Lincoln Town Car Rotor, Front
Part Number: 3W1Z-1125-AB
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 3W1Z-1125-AA, BRRF-36
- Base No.: 1125
- Item Weight: 22.80 Pounds
- Item Dimensions: 2.8 x 14.0 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-1125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Lincoln Town Car Brake Disc

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Town Car Brake Disc Parts Questions & Experts Answers

Q: How to remove and replace the front brake disc on 2009 Lincoln Town Car?
A: One must begin brake rotor replacement by first removing the tire along with the wheel. The brake caliper along with brake pads and anchor plate assembly must never dangle from the brake hose since such suspension could result in damage to the components. To remove the brake caliper along with its anchor plate and pads, first extract the two plate mounting bolt screws then set the complete assembly aside with the removal of the bolts. Secure the supported assembly by mechanic's wire. New anchor plate bolts must be employed for installation before tightening them to 160 Nm (118 lb-ft). Rust penetrants should be applied to the joint between the brake disc and wheel hub when the brake disc is hard to separate. Begin by removing the brake disc together with its retention ring which can be discarded. Reverse the removal procedure for installation while using a new retention ring. Using specified brake parts cleaner the brake disc along with wheel and wheel hub must be cleaned from any rust or foreign materials. Before repeating the test apply anti-seize lubricant to the hub mounting surface to stop corrosion then check proper brake functioning requires multiple brakes applications.