How to Service and Repair the Water Pump on 2009 Lincoln Town Car?

Step one, service the coolant pump, drain the cooling system, loosen the pulley bolts and take out the accessory drive belt. Take out the bolts that hold the coolant pump and dispose the O-ring seal. Install the new pump with a necessary alignment and making sure that there is a lubricated O-ring seal. Decontaminate sealing surfaces and fill the cooling system.

OEM 2009 Lincoln Town Car Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump found

View related parts
2009 Lincoln Town Car Water Pump Part Number: 5W7Z-8501-AA
$65.59 MSRP: $105.82
You Save: $40.23 (39%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 9W7Z-8501-A
- Replaces: YW7Z-8501-BB
- Base No.: 8501
- Item Weight: 3.00 Pounds
- Item Dimensions: 5.8 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W7Z-8501-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Lincoln Town Car Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Town Car Water Pump Parts Q&A

Q: How to Service and Repair the Water Pump on 2009 Lincoln Town Car?
A: Step one, service the coolant pump, drain the cooling system, loosen the pulley bolts and take out the accessory drive belt. Take out the bolts that hold the coolant pump and dispose the O-ring seal. Install the new pump with a necessary alignment and making sure that there is a lubricated O-ring seal. Decontaminate sealing surfaces and fill the cooling system.