My Garage
Cart

OEM 2009 Lincoln Town Car Thermostat

Engine Coolant Thermostat
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

  • 2009 Lincoln Town Car Thermostat Diagram - 7L3Z-8575-E
    View related parts

    2009 Lincoln Town Car Thermostat Part Number: 7L3Z-8575-E

    $20.68 MSRP: $32.00
    You Save: $11.32 (36%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Thermostat Assembly; Engine Coolant Thermostat; Thermostat, Coolant
    • Replaces: 7L3Z-8575-D, 7L3Z-8575-B, AL3Z-8575-B, RT-1196, RT-1230, 3L3Z-8575-AA, 3L3Z-8575-AC, 7L3Z-8575-C, AL3Z-8575-A, RT-1204, RT-1234, RT-1178, RT-1229, RT-1165
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7L3Z-8575-E
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following 2009 Lincoln Town Car Submodels:
    • Anniversary, Base, Cartier, Cartier L, Cypress, Designer Series, Executive, Executive L, Executive Protection Series, Jack Nicklaus, Protection Series, Signature, Signature L, Signature Limited, Touring Edition, Tournament Edition, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Lincoln Town Car Thermostat

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Town Car Thermostat Parts Q&A

  • Q: How to service the thermostat on 2009 Lincoln Town Car?
    A: Service of the thermostat begins with draining the cooling system. The two coolant outlet adapter bolts require hand-tightening at first before final tightening to achieve proper coolant outlet adapter seating. Screw out the two bolts from their positions and place the coolant outlet adapter alongside the hose next to them. The installation process requires the bolt tightening torque to be set at 25 Nm (18 lb-ft). Start by discarding the O-ring seal then extract the coolant thermostat from the intake manifold while cleaning every sealing surface with metal surface prep. The installation process ends when you perform the reverse steps of removal and complete cooling system filling and bleeding.