How to Ensure Proper Functioning of the Wiper Motor on 2009 Mercury Grand Marquis?

To service the wiper motor, take the cover off, and manually rotate the linkage up to the highest wiper position. Loose the wiper arm and pivot shaft without disconnection of the linkages. Unscrew the three bolts that hold the motor in place, re-screw the motor, using bolt tightening to 13 Nm (115 lb-in) and repeat the process.

OEM 2009 Mercury Grand Marquis Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2009 Mercury Grand Marquis Wiper Motor Part Number: 8W7Z-17508-A
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor
- Replaces: 6W7Z-17508-AC, 3W7Z-17508-AA
- Base No.: 17508
- Item Weight: 8.80 Pounds
- Item Dimensions: 8.4 x 6.5 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W7Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Grand Marquis Submodels:
- GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Mercury Grand Marquis Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Grand Marquis Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Grand Marquis Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Grand Marquis Wiper Motor Parts Q&A

Q: How to Ensure Proper Functioning of the Wiper Motor on 2009 Mercury Grand Marquis?
A: To service the wiper motor, take the cover off, and manually rotate the linkage up to the highest wiper position. Loose the wiper arm and pivot shaft without disconnection of the linkages. Unscrew the three bolts that hold the motor in place, re-screw the motor, using bolt tightening to 13 Nm (115 lb-in) and repeat the process.